Icom
Icom is one of today's best-known brands of wireless communication devices. Since its inception in 1964, the company has evolved considerably to offer the innovative range of products it does today. The brand is a trusted manufacturer of communication devices such as walkie-talkies, industrial two-way radios, amateur radios, wifi transceivers, communication receivers and radios for navigation and aviation. Read more...
• Communication throughout the Coverage Area of LTE (4G) and 3G Network
• The service is available within the EU (accurate country list can be provided upon request)
• Full-Duplex Communication
• Push-to-Talk Instant Communications (no call-setup time)
• Plannable costs due to a fixed monthly fee
• No additional infrastructure required
• No radio license required
PRESENTER radios (total quantity: 3 pieces). Subsription is needed for use. The radio price doesn't include subscription fee.
Special gross price: 179.55€ (Net price: 141.38€)
• Communication throughout the Coverage Area of LTE (4G) and 3G Network and pre-programmed VHF frequencies (digital mode) as hybrid radio
• The service is available within the EU (accurate country list can be provided upon request)
• Full-Duplex Communication (LTE)
• Push-to-Talk Instant Communications (no call-setup time)
• VHF URH radio integrated into LTE radio (dual mode)
• Supplied accessories: BP-303 3350mAh Li-ion battery, MB-133 belt clip
• Please note that the annual subscription is not included in this article number
• Use with EH-15B earphone
• Tx/Rx: 144-146 MHz, DV/FM
• Compatible with ID-RP2C controller
• Integrated Controller Function
• 25W RF output power
• Digital GMSK modulation
• CW ID/Voice ID transmitter
• SD card slot for firmware update, saving setting data and FM mode Voice ID audio
• 10 MHz reference signal input
• Tx/Rx: 430-440 MHz, DV/FM
• Compatible with ID-RP2C controller
• Integrated Controller Function
• 25W RF output power
• Digital GMSK modulation
• CW ID/Voice ID transmitter
• SD card slot for firmware update, saving setting data and FM mode Voice ID audio
• 10 MHz reference signal input
• Tx/Rx: between 1240-1300 Mhz, DV/DD/FM
• Compatible with ID-RP2C controller
• Integrated control function
• Maximum 10W RF output power
• Optional UX-262 LTE unit for wireless internet connection
• Data transfer rate of 4.8kbps (DV) and 128kbp (DD)
• Digital/analog mixed mode operation
• High duty cycle operation
• 16 analogue PMR446 channels
• 32 digital PMR446 channels
• Professional rugged body and high performance
• Easy to use
• 1500mW audio output power
• CTCSS and DTCS group codes on analogue channels
• Common ID code for group communication on digital channels
• 270g weight with battery
• 26 hours operation with the supplied Li-ion battery
• Confirms with IP67 standard (dust-tight and waterproof)
• Equivalent to MIL-STD 810 G requirements
• Licence free all over Europe
• IC-M510BB VHF marine radio with 2 handsets
• Frequency range: 156 - 163 Mhz
• Usable Channels: INT, USA, Atis channels
• Power supply requirement: 12 V DC
• IPX7 waterproof, 1 m depth water for 30 minutes
• Integrated GPS receiver
• Anchor Watch function
Transmitter:
• Output power: 25 W, 1 W
• Max frequency deviation: 5 kHz
• Frequency tolerance: 0.5 kHz
• Space Saving Configuration for Limited Helm Space
• Install Up to Three Stations on Board with the IC-M510BB
• Built-in Class D DSC
• Integrated AIS Receiver
• NMEA 2000 and NMEA 0183-HS Connectivity
• Two Minutes Voice Recording Function
• Active Noise Cancelling Technology
• DSC Remote Control Interface for PC Console Software (EN 300 338-8 Compatible)
• Loud RX Hailer/Foghorn
• IPX7 waterproof (1 m depth water for 30 minutes)
• Integrated GPS receiver
• AquaQuake function
• External speaker connection from the CommandMic cable
• Output power (at 12 V DC): 25 W, 1 W
• Built-in active noise reduction and external speaker amplifier
• Class D DSC VHF marine radio with WLAN function
• Built-in GNSS receiver and GPS receiver
• AquaQuake function prevents degradation of sound quality when waterlogged speaker waterlogged
• Remote control via an app for iOS/Android systems
• Wide viewing angle colour TFT LCD
• NMEA 0183/HS and NMEA 2000 connection
• Control with COMMANDMIC HM-195 or HM-229 series
• IP68 dust and waterproof protection
• VHF marine channels
• Maximum 25W RF output power
• ATIS and DSC channels with code sending
• Integrated AIS receiver
• AquaQuake draining function
• Built-in active noise cancelling and external speaker amplifier
• Last call voice recording (max. 2 minutes)
• IPX8 advanced waterproof protection (1 m depth of water for 60 minutes)
• Compatible with the Icom’s marine navigation system, MarineCommander
• MA-500TR AIS transponder can be connected
• This product refers to the rear microphone version
• Dual and Tri-watch functions
• Instant-access button for Channel 16 and call channel
• Supports new four-digit channels effective from January 1, 2017
• Tx: 144-146 / 430-440MHz
• Rx: 136–174 / 400–479 MHz
• FM broadcast receiver: 76–108 MHz
• 208 programmable channels with 6 character channel name
• Powerful 1500 mW audio output
• Maximum 5W RF output power
• Confirms with IP67 standard (waterproof and dust-tight protection)
• CTCSS, DTCS coder and encoder
• LCD display and full keypad
• 5 W RF Output in 144 and 430 MHz
• Home Button on Top Panel for Quick Access to Calling Channel
• Li-ion battery and rapid charger supplied as standard
• Free CS-T10 downloadable programming software
• Tx frequency coverage:144-146 / 430-440MHz
• Rx frequency coverage: 108-174 / 375-479MHz
• 5/2,5/1/0,5/0,1W RF output power
• Mode: DV, FM, FM-N, WFM, AM, AMN* (*cannot be received from 225 to 374.995 MHz)
• Built-in GPS receiver
• D-STAR DV mode (digital voice + data)
• V/V, U/U, V/U, double channel monitoring
• VHF/UHF airband and FM broadcast receiver
• Confirms with IPX7 standard (submersible construction)
• MicroSD card slot
• Improved and new software features
• 19-inch rack-mountable, 2 unit high design with display
• Space for additional RF channel module
• Programmable between 400-470 MHz
• IDAS digital and analogue mixed mode
• 32 programmable channels, 5 programmable buttons
• Maximum 25W RF output power
• Upgradeable with optional control cards (Simulcast Conventional, Multi-site Conventional, Single site Trunking, Multi-site Trunking)
• Remote access via IP interface via optional UC-FR5300 IP card
• Can also be operated as a stand-alone repeater
• Programmable between 400-470 MHz
• IDAS digital and analogue mixed mode
• 32 programmable channels, 5 programmable buttons
• Maximum 25W RF output power
• Upgradeable with optional control cards (Simulcast Conventional, Multi-site Conventional, Single site Trunking, Multi-site Trunking)
• Remote access via IP interface via optional UC-FR5300 IP card
• Remote control software for Windows operating system
• Radio over IP Gateway (RoIP)
• Create one system with IP telephones, analogue telephones and two-way radios
• Site-to-site and site-to-multisite radiocommunication
• Connect you radionetworks together even though they are on different locations
• Analogue and digital radios can be interconnected
• Audio in / out interfaces on the back
• RC-FS10 dispatcher software can be connected
• Connect external device (signal-lamp, gate-opener, etc)
• Supplied accessories: BC-236 AC adapter, antenna, antenna connector
• USB data communication cable for connection to PC or Android device
• Connector type: USB Type C - micro B
• Cable length: 106 cm
• With UC-FR5300 #14, Simulcast Conventional, Multi-Site Conventional and Single Site Type-D Trunking systems are available
• Supplied with CF-FR5300SC software card and UX-241 GNSS antenna
• With UC-FR5300 #12 Multi-Site Conventional and Single Site Type-D Trunking systems are available
• Supplied with CF-FR5300MC software card
• With UC-FR5300 #13 Multi-Site Conventional Multi-Site Type-D Trunking and Single Site Type-D Trunking systems are available
• Supplied with a CF-FR5000MT software card
• With UC-FR5300 #11 Single Site Type-D Trunking systems are available
• Equipped with 8-pin waterproof plug
• 4 buttons for easy operation
• Cable length: 510 mm
• Weight: 253 g
• IPX8 waterproof
• Design to fit the IC-M804 mobil marine radio
• Maximum input power: 7 W
• Impedance: 8 Ω
• Dimensions: 110 mm (width) × 110 mm (height) × 84,4 mm (depth)
• Weight: 307 g
• IPx7 water resistance
• Full remote control capability for Icom marine radios
• Audio power output: 2.0 W
• Intercom function IC-M506/EURO, IC-M424/G or IC-M423/G
• Up to 18.3 meters remote installation requiring two optional OPC-1541 extension cables
• Cable length: 560 mm
• DSC (Distress) button on the back of the unit
• IPX7 water resistance
• Supplied accessories: 6.1 m cable; mounting plate for cable connector; microphone hanger
Icom wireless communication devices are all made in Japan
Icom Inc. is one of the companies for which quality has been more important than cost reduction. The company did not move production to countries that would produce its amateur, commercial, marine and aviation radios at lower cost. The brand felt it was essential that its products continued to be labelled "Made in Japan". It therefore kept 100 percent of its manufacturing base in Japan. But production was not only kept in the mainland, it was also significantly improved.
Icom's Arida plant has had an advanced manufacturing system for many years. For example, since 2019, industrial robots have been assembling the communication devices manufactured by the brand. But the company is also involved in a number of collaborations. As early as 2007, it signed a partnership agreement with KDDI, and a few years later the company's management decided to work closely with Ageet and NTT West Japan. But Icom acquired Macrotechnos Co Ltd last year to put even more emphasis on software development within the company.
Icom is a global brand
Icom is known around the world today as a trusted brand dedicated to two-way radio communications. The company's transceivers are used by many professional organisations around the world, including the US Department of Defense. The brand has one of the widest ranges of models in the professional commercial radio market. Icom currently offers both dPMR and NXDN based transceivers, including the so-called dPMR446 transceivers for unlicensed use, as well as professional two-way radio devices for the URH band. Of course, we also offer ATEX versions and analogue and digital licence-free radios.
Icom's worldwide sales and service network
Icom Inc. sells its amateur radios and other wireless communication devices in more than 80 countries around the world. The company focuses not only on sales, but also on service. To this end, the company has a well-established service network. In Hungary, DND Telecom Kft. has been the Hungarian importer of Icom Inc. for more than 20 years. Thanks to this close cooperation, the entire Icom portfolio is available in the DND Telecom webshop, including walkie-talkies, industrial VHF radios, amateur radios, wifi transceivers, radios for aviation and shipping, etc.
At our service centre, we also carry out warranty and out-of-warranty repairs on branded communication devices, all using genuine factory Icom parts of course. If necessary, we return the devices to Icom, where we will carry out the necessary tests and repairs. In addition, we are happy to program and install Icom products.