President Mobile CB Radio
The President CB mobile radio is a 27 MHz two-way radio designed for vehicle communication, operating within the 26.965-27.405 MHz frequency range and using 40 channels in the models included in this category. The radios support AM and FM modulation, while selected versions also provide USB and LSB SSB modes. The range includes manual or automatic squelch, VOX, Scan, programmable emergency channels, noise filters, external speaker connection and, depending on the version, CTCSS/DCS, NRC and SWR measurement functions. Read more...
• Frequency ranges: from 26.965 MHz to 27.405 MHz
• Number of channels: 40
• Power supply : 13,2V
• Microphone plug: 6 pins
• Modulation modes: AM/FM (4W)
• Squelch: Manual squelch
• Vox mode
• Channel display
• External loudspeaker jack
• Size: 115 (L) x 130 (W) x 45 (H)
• Weight: 0,560 kg
• Frequency ranges: from 26.965 MHz to 27.405 MHz
• Number of channels: 40
• Power supply : 12V/24V
• Microphone plug: 6 pins
• Modulation modes: AM/FM (4W)
• Squelch: Manual squelch
• Channel preselection: emergency channel (EMG) programmable
• Vox mode
• Channel display
• External loudspeaker jack
• Size: 125 (W) x 180 (D) x 45 (H)
• Weight: 0,9 kg
• Frequency ranges: between 26.965 MHz and 27.405 MHz
• Number of channels: 40
• Power supply: 12V
• Microphone connector: 6-pin
• Modulation modes: AM/FM (4W)
• Squelch: manual noise squelch
• Channel preselection: emergency channel (EMG) programmable
• Vox mode
• Channel display
• External speaker connector
• Dimensions: 102 (width) x 100 (depth) x 25 (height)
• Weight: 320g
• Frequency ranges: from 26.965 MHz to 27.405 MHz
• AM / FM / SSB
• CTCSS: 38 tones, DCS: 104 codes
• Power supply : 12V
• Microphone plug: 6 pins
• Manual squelch
• Channel preselection: 2 , channel 9 & 19 , emergency channel (EMG) programmable
• Vox mode
• Memory: 4
• Size: 56 (H) x 185 (W) x 172 (D)
• Weight: 1,19 kg
• Frequency ranges: from 26.965 MHz to 27.405 MHz
• Power supply : 12V/24V
• Microphone plug: 6 pins
• Modulation modes: AM/FM (4W)
• Squelch: Manual squelch
• Channel preselection: emergency channel (EMG) programmable
• Channel display
• External loudspeaker jack
• Size: 125 (W) x 175 (D) x 45 (H)
• Weight: 0,9 kg
• Frequency ranges: between 28,000 MHz and 29,700 MHz
• Power supply: 12V
• Microphone connector: 6-pin
• Modulation modes: AM/FM
• Squelch: manual noise squelch
• Channel preselection: emergency channel (EMG) programmable
• Channel display
• External speaker connector
• Dimensions: 170 (width) x 160 (depth) x 52 (height)
• Weight: 1.1 kg
• Frequency ranges: from 24.890 Mhz to 24.990 Mhz and from 28.000 Mhz to 29.700 Mhz (continuous scanning)
• AM / FM / SSB
• CTCSS: 38 tones, DCS: 104 codes
• Power supply : 12V
• Microphone plug: 6 pins
• Automatic Relay
• Manual squelch
• Channel preselection: 2 , channel 9 & 19 , emergency channel (EMG) programmable
• Vox mode
• Memory: 4
• Size: 170 (W) x 250 (D) x 52 (H)
• Weight: 1,4 kg
• Frequency ranges: 26.965 MHz to 27.405 MHz
• Power supply: 12V/24V
• Microphone connector: 6-pin
• Modulation modes: AM / FM
• Squelch: manual noise squelch
• Channel preselection: emergency channel (EMG) programmable
• Channel display
• External speaker connector
• Dimensions: 150 (width) x 165 (depth) x 45 (height)
• Weight: 750 g
• Frequency ranges: between 26.965 MHz and 27.405 MHz
• Power supply: 12V/24V
• Modulation modes: AM / FM
• Number of channels: 40
• Squelch: manual noise squelch
• Channel display
• External speaker connector
• Dimensions: 170 (width) x 150 (depth) x 52 (height)
• Weight: 1 kg
• Frequency ranges: 26.965 MHz to 27.405 MHz
• Power supply: 12V
• Modulation modes: AM / FM
• Number of channels: 40
• Squelch: manual noise squelch
• Channel preselection, 2 emergency channels (EMG) programmable
• Channel display
• External speaker connector
• Dimensions: 170 (width) x 160 (depth) x 52 (height)
• Weight: 1.1 kg
• Frequency ranges: 26.965 MHz to 27.405 MHz
• Power supply: 12V/24V
• Modulation modes: AM / FM
• Number of channels: 40
• Squelch: manual noise squelch
• Channel preselection, 2 emergency channels (EMG) programmable
• Channel display
• External speaker connector
• Dimensions: 125 (width) x 151 (depth) x 45 (height)
• Weight: 0.9 kg
• Frequency ranges: 26.965 MHz to 27.405 MHz
• Power supply: 12V/24V
• 38 CTCSS subchannel system and 104 DCS codes
• Modulation modes: AM / FM
• Number of channels: 40
• Squelch: manual noise squelch
• Channel preselection, 2 emergency channels (EMG) programmable
• Channel display
• External speaker connector
• Dimensions: 125 (width) x 165 (depth) x 45 (height)
• Weight: 0.9 kg
• Frequency ranges: 26.965 MHz to 27.405 MHz
• Power supply: 12V/24V
• Modulation modes: AM / FM
• Number of channels: 40
• Squelch: manual noise squelch
• Channel preselection, 2 emergency channels (EMG) programmable
• External speaker connector
• Dimensions: 115 (width) x 180 (depth) x 35 (height)
• Weight: 0.8 kg
President CB mobile radio for 27 MHz vehicle communication
The common basis of the President CB radios in this category is 40-channel CB operation. AM/FM versions are specified with 4 W carrier power, while versions with SSB support are rated at 4 W in AM and FM and 12 W PEP in USB and LSB modes. The radios are available in several physical formats, while the power supply depends on the version and can be suitable for 12 V or 12/24 V vehicle electrical systems. Several models also support multi-standard frequency configuration.
How does a 27 MHz CB radio operate on 40 channels?
The channels of a 27 MHz CB radio are located within the 26.965-27.405 MHz range. After switching on the device, the appropriate country configuration must be used because the selectable frequency bands and operating conditions may differ between countries. Documented multi-standard configurations include EU, U, D, PL and IN settings. Depending on the model, channels are selected using up/down buttons or a rotary channel selector, while the selected channel is shown on the display.
AM/FM CB radio and SSB CB radio modulation options
On AM/FM CB radios, the modulation mode must be set to the same mode used by the communication partner. The basic models in the category support AM and FM operation, while the more extensively equipped SSB CB radio also provides AM, FM, USB and LSB modes. For this version, the documented technical data specifies 4 W AM, 4 W FM and 12 W PEP USB/LSB output power, 50 ohm antenna impedance, 300 Hz-3 kHz audio frequency response and maximum audio output power of 3 W.
How do squelch and noise filtering work in President CB transceivers?
Manual squelch control is available on several models, while selected versions also provide ASC, or Automatic Squelch Control. ANL refers to Automatic Noise Limiter, NB to Noise Blanker, while HI-CUT is a filter intended to reduce higher-frequency interference during reception. Some President CB transceivers also include NRC, which can be configured as a switchable filter separately for receive and transmit modes. The exact range of available filters varies by model.
VOX, Scan and programmable emergency channels in mobile CB communication
On the documented models, VOX allows transmission to be activated by speaking into the microphone without pressing the PTT button. VOX sensitivity, Anti-Vox level and delay can be adjusted separately on certain radios. The Scan function is used to scan channels, while Scan Skip allows selected channels to be excluded. Several radios also provide programmable EMG emergency channels, dual watch, memory, TOT, Talkback and Roger beep functions.
How can CTCSS and DCS be used on selected President CB radios?
CTCSS and DCS are not included on every model in the category. Versions that support these functions provide 38 CTCSS tones and 104 DCS codes, which can be used in FM mode. Different codes can be assigned by channel, while TX and RX settings can be configured in the radio menu. After activation, the display shows a CTCSS or DCS indication. If these functions are required, a President CB radio that specifically documents CTCSS/DCS support must be selected.
CB antenna connection, 50 ohm impedance and SWR adjustment
The documented radios are designed for 50 ohm antenna systems, and several models use an SO-239 CB antenna connector. SWR adjustment is required during initial installation and after replacing the antenna. An external SWR meter can be connected between the radio and antenna, while certain versions also include an automatic SWR meter or SWR display function. For mobile antennas, a suitable metal surface must be provided for the ground plane at the installation point, while the coaxial cable should be routed without sharp bends or crushing.
What power supply and vehicle installation options are available?
The category includes CB mobile radios for 12 V and 12/24 V electrical systems; technical specifications also list 13.2 V and 13.2/26.4 V supply values. The radios are supplied with a mounting bracket, screws and a fused power cable, while several versions include an electret microphone with UP/DOWN buttons. When installed in a vehicle, the radio must not obstruct the driver or passengers, and power, antenna and accessory cables should be routed so that they do not interfere with driving.
President Electronics controls, displays and connections
President Electronics mobile radios are available with channel displays and multifunction LCD displays. Depending on the version, frequency display, digital S-meter, brightness control, keypad lock, menu functions and memory may be available. A 6-pin front microphone connector is used on several models, while external speaker connection is also common. Selected radios additionally provide a 5 V / 2.1 A USB socket, external VOX microphone connection and PA loudspeaker output.
Which President CB mobile radio suits a specific requirement?
Selection should begin by determining the required modulation mode, vehicle supply voltage, noise-filtering functions and antenna system. If AM/FM communication is sufficient, several compact and conventional-size versions are available. For SSB operation, a radio with documented USB/LSB support is required. If CTCSS/DCS, NRC, automatic SWR measurement, Talkback, dual watch or 12/24 V operation is needed, the selected model must specifically include the required function.
- Advantage: 40-channel operation in the 26.965-27.405 MHz CB range with multiple control and noise-filtering functions.
- Advantage: the category includes both AM/FM and SSB-capable versions.
- Advantage: VOX, Scan, EMG, ASC and external speaker connection are available on several models.
- Limitation: SSB, NRC, CTCSS/DCS, automatic SWR measurement and other extended functions are not available on every model.
- Limitation: the correct country configuration and applicable local operating regulations must be observed.
When comparing models, it is therefore useful to consider not only the physical size of the radio but also modulation, power supply, noise filters, antenna connection and operating requirements.
What are the most common questions about President CB mobile radios?
- What frequency range do they use?
The CB radios in this category operate between 26.965 and 27.405 MHz with 40 channels. - What is the AM/FM transmit power?
The documented CB versions are specified with 4 W AM and 4 W FM output power. - Is SSB operation available?
Yes, on selected models. The SSB version is specified with 12 W PEP in USB and LSB modes. - What type of antenna is required?
The documented mobile radios use a 50 ohm antenna system, with an SO-239 antenna socket on several models. - Why is SWR adjustment important?
The antenna system SWR must be adjusted during initial installation and after replacing the antenna; certain radios also include their own SWR measurement function.
The exact functions always depend on the specific radio version, so President CB radios should be compared based on their documented technical feature lists.
Summary for selecting a President CB mobile radio
We recommend starting the selection of a President CB mobile radio with the required AM/FM or SSB modulation, the 12 V or 12/24 V vehicle power supply and the necessary noise-filtering functions. Next, check whether VOX, Scan, EMG, NRC, CTCSS/DCS, automatic SWR measurement, memory, Talkback or USB connectivity is required. A suitable 50 ohm CB antenna and correct SWR adjustment are separate parts of system installation.
