Panorama Antennas GPS Antennas

Panorama Antennas GPS antenna: active GPS/GNSS antenna with magnetic mounting

The GPSME series uses a magnetic-base antenna design with an active GPS/GNSS element. The low-profile housing of the GPSME-6SP is manufactured from black ABS and measures 48.6 mm in length, 39.2 mm in width and 15.7 mm in height. The integrated magnetic base allows the antenna to be installed, removed and repositioned without damaging the vehicle. The 6 m cable exits directly from the antenna housing, and the 6SP version is terminated with an SMA male connector.

The active antenna element of the GPSME-6SP requires an operating voltage of 3-5 V DC, supplied through the coaxial cable. Current consumption is less than 20 mA.

What frequency range does the GPSME-6SP GPS antenna operate in?

The GPSME-6SP operates in the 1562-1612 MHz frequency range. The VSWR is less than 2.0:1 within 1575 MHz +/- 4 MHz. The specified polarisation is Right Hand Circular, while the impedance is 50 Ohm. These radio frequency parameters form part of the documented electrical characteristics of the GPSME-6SP active GPS/GNSS antenna.

1562-1612 MHz GPS antenna with Right Hand Circular polarisation

The 1562-1612 MHz frequency range is combined with 50 Ohm impedance and Right Hand Circular polarisation. The VSWR is less than 2.0:1 within 1575 MHz +/- 4 MHz. The antenna contains an active GPS/GNSS element and requires 3-5 V DC power supplied through the coaxial cable, with current consumption below 20 mA.

For receiver-side connection, the SMA male connector, 50 Ohm impedance and coaxial power supply requirements should be checked. The GPSME-6SP is supplied with a 6 m RG174 cable.

How is the active GPS antenna powered through the coaxial cable?

The GPSME-6SP requires 3-5 V DC operating voltage, which is supplied to the active antenna element through the coaxial cable. The documented current consumption is less than 20 mA. The antenna uses an RG174 cable with a 3 mm outer diameter and a length of 6 m. The GPSME-6SP version is terminated with an SMA male connector.

Within the GPSME product family, the GPSME-6FP uses an FME male connector, the GPSME-6SMCP uses an SMC male connector, while the GPSME-6SP is equipped with an SMA male connector. We recommend checking the receiver connector, 50 Ohm impedance and 3-5 V DC coaxial antenna power supply together before ordering.

Magnetic GPS antenna with 6 m RG174 coaxial cable

The GPSME-6SP has an integrated magnetic base. The magnetic mounting system allows the antenna to be installed, removed and repositioned without damaging the vehicle as a result of the mounting process. The antenna is supplied with a 6 m RG174 coaxial cable with a documented outer diameter of 3 mm. The technical drawing also indicates a protective pad on the underside of the antenna.

The housing is manufactured from black ABS and has a low-profile design. Its length is 48.6 mm, width is 39.2 mm and height is 15.7 mm. The operating temperature range is -40 to +80 degrees Celsius. The magnetic mounting system, black ABS housing, 6 m RG174 cable and SMA male connector form part of the mechanical and connection configuration of the GPSME-6SP.

What connector does the Panorama GPSME-6SP use?

The GPSME-6SP uses an SMA male connector located at the end of the 6 m RG174 coaxial cable. The documented outer diameter of the cable is 3 mm. The GPSME series is also available with other connector versions: the GPSME-6FP uses an FME male connector, while the GPSME-6SMCP uses an SMC male connector. The current Panorama Antennas GPS antenna category contains the GPSME-6SP version.

The antenna impedance is 50 Ohm. The active antenna element requires 3-5 V DC supplied through the coaxial cable, with current consumption below 20 mA. The SMA male connector, impedance and coaxial supply voltage are therefore specified technical parameters that should be checked for connection compatibility.

50 Ohm antenna, VSWR and operating temperature

The GPSME-6SP has an impedance of 50 Ohm. The VSWR is less than 2.0:1 within 1575 MHz +/- 4 MHz, and the polarisation is Right Hand Circular. The operating temperature range is -40 to +80 degrees Celsius. The antenna housing is manufactured from black ABS and measures 48.6 x 39.2 x 15.7 mm.

Advantages:

• The magnetic base allows the antenna to be installed, removed and repositioned without damaging the vehicle.
• The active GPS/GNSS element is powered through the coaxial cable.
• The GPSME-6SP is supplied with a 6 m RG174 cable and an SMA male connector.
• The low-profile housing measures 48.6 x 39.2 x 15.7 mm.

Limitations and technical parameters to check:

• The operating frequency range is 1562-1612 MHz.
• The active element requires a 3-5 V DC coaxial power supply.
• The GPSME-6SP uses an SMA male connector.
• The model uses a magnetic mounting base.

When selecting the antenna, the connector type, impedance, supply voltage and mounting method should be checked together.

What applications is the Panorama Antennas GPS antenna specified for?

The specified applications of the GPSME-6SP include vehicle tracking, fleet, taxi and logistics systems, IoT and industrial systems, navigation equipment and temporary vehicle installations. The GPSME series is designed for GPS/GNSS applications and is available with different connector variants. On the GPSME-6SP, the 6 m RG174 cable and SMA male connector define the connection configuration.

The magnetic base allows installation in which the antenna can be fitted, removed and repositioned. The GPSME-6SP is housed in a low-profile black ABS enclosure. The -40 to +80 degrees Celsius operating temperature range, 50 Ohm impedance and 3-5 V DC coaxial power supply are among the documented technical characteristics of the model.

Frequently asked questions about the Panorama GPSME-6SP antenna

• What is the frequency range of the GPSME-6SP?
  The operating frequency range is 1562-1612 MHz.
• What polarisation does the GPS/GNSS antenna use?
  The antenna uses Right Hand Circular polarisation.
• What power supply does the active GPS antenna require?
  The operating voltage is 3-5 V DC, supplied through the coaxial cable. Current consumption is less than 20 mA.
• What cable is supplied with the GPSME-6SP?
  A 6 m RG174 coaxial cable with a 3 mm outer diameter.
• What connector is fitted to the GPSME-6SP cable?
  The GPSME-6SP version is fitted with an SMA male connector.
• What is the antenna impedance?
  The impedance is 50 Ohm.
• What are the dimensions of the GPSME-6SP?
  The housing measures 48.6 x 39.2 x 15.7 mm.
• What is the operating temperature range?
  The operating temperature range is -40 to +80 degrees Celsius.

Before selecting the GPSME-6SP, the receiver frequency, power supply and connection parameters should also be checked.

Summary: Panorama Antennas GPS antenna

The current GPSME-6SP model in the Panorama Antennas GPS antenna category is an active, magnetically mounted GPS/GNSS antenna operating in the 1562-1612 MHz frequency range with 50 Ohm impedance and Right Hand Circular polarisation. The 3-5 V DC power supply is provided through the coaxial cable, and current consumption is less than 20 mA. The black ABS housing measures 48.6 x 39.2 x 15.7 mm, the RG174 cable is 6 m long with a 3 mm outer diameter, and the GPSME-6SP is terminated with an SMA male connector. Documented applications include vehicle tracking, fleet, taxi and logistics systems, IoT and industrial systems, navigation equipment and temporary vehicle installations.