Telmor Multi-band Base Antenna

Telmor multiband base antenna for GSM, 4G, 5G and WiFi systems

The TT Connect LOG is a passive antenna designed for receiving signals from GSM, LTE and 5G bands and for use with LTE/5G modems or repeaters. It is a directional antenna with vertical and horizontal polarization. It can be installed in both vertical and horizontal orientation. The product code is TRI-130-999. Each antenna is supplied with a 7 m long, 50 ohm coaxial cable with a pre-fitted SMA male connector.

Which frequency ranges does the Telmor TT Connect LOG antenna cover?

The documented frequency coverage is divided into four ranges: 698-960 MHz, 1710-2700 MHz, 3300-3800 MHz and 4800-5000 MHz. The specified systems are GSM-1800, 4G-LTE, 5G 3.4-3.8 GHz, WiFi 2.4 GHz and WiFi 5 GHz. The TT Connect LOG can be used with these systems, while the specified electrical impedance is 50 ohm and the connector type is SMA male.

Directional antenna with 12-15 dBi gain

The TT Connect LOG is a directional antenna with a specified gain of 12-15 dBi. Its VSWR is 3, and it supports both vertical and horizontal polarization. The main technical parameters are:

• Type: multiband GSM, LTE, 5G and WiFi directional antenna
• Frequency range: 698-960 MHz; 1710-2700 MHz; 3300-3800 MHz; 4800-5000 MHz
• Gain: 12-15 dBi
• Impedance: 50 ohm
• VSWR: 3
• Polarization: vertical, horizontal
• Connector: SMA male

How can the Telmor antenna be used for MIMO 2x2 communication?

Two TT Connect LOG antennas can be used together for MIMO 2x2 communication. A pair of these antennas forms a suitable set for MIMO 2x2 communication. The antennas are designed for use with LTE/5G modems or repeaters. Each antenna has its own 7 m long, 50 ohm coaxial cable with a pre-fitted SMA male connector. The TT Connect LOG is a passive design intended for receiving signals from GSM, LTE and 5G bands.

Vertical and horizontal antenna installation

The Telmor TT Connect LOG can be installed vertically or horizontally. Its polarization can be vertical or horizontal. The product has a two-section design that makes it easy to transport and straightforward to install. The two-section construction is part of the mechanical design of the TT Connect LOG, while the two installation orientations allow the use of vertical or horizontal polarization.

SMA connection and 7 metre coaxial cable

Each TT Connect LOG antenna is equipped with a 7 m long, 50 ohm coaxial cable. The cable is terminated with a pre-fitted SMA male connector. The coaxial cable length, impedance and connector type are therefore clearly defined as 7 m, 50 ohm and SMA male. The antenna is designed for use with LTE/5G modems or repeaters, while the cable and SMA connector are supplied as part of the complete antenna.

Telmor multiband antenna summary and FAQ

The TT Connect LOG is a passive, directional, multiband antenna for GSM-1800, 4G-LTE, 5G, WiFi 2.4 GHz and WiFi 5 GHz systems. It covers four frequency ranges, provides 12-15 dBi gain, has a 50 ohm impedance and a VSWR of 3. It can be installed vertically or horizontally, while two identical antennas can be used for MIMO 2x2 communication.

• Which frequency ranges does the TT Connect LOG cover?
  The specified ranges are 698-960 MHz, 1710-2700 MHz, 3300-3800 MHz and 4800-5000 MHz.
• Which systems can it be used with?
  It can be used with GSM-1800, 4G-LTE, 5G 3.4-3.8 GHz, WiFi 2.4 GHz and WiFi 5 GHz systems.
• What is the antenna gain?
  The specified gain is 12-15 dBi.
• Can it be used in a MIMO 2x2 system?
  Yes. Two TT Connect LOG antennas can be used for MIMO 2x2 communication.
• What type of cable does it use?
  The antenna is supplied with a 7 m long, 50 ohm coaxial cable.
• What connector is fitted?
  The cable is equipped with a pre-fitted SMA male connector.