Icom Antenna and Antenna Accessory
• SMA - BNC antenna adapter for handheld radios
• BNC antenna adapter for Icom handheld radios
• Frequency coverage: 3,5-30MHz
• 2,5m long antenna
• Optional AH-4antenna tuner may be required
• 100W automatic antenna tuner
• Frequency coverage: 3,5-54MHz
• External antenna with 1,5m cable for IC-SAT100 radio
• The AH-705 is a small portable antenna tuner that has been designed to work between the 1.8-50MHz bands. It can be powered either by alkaline batteries or DC 13.8V supply
• Covers the 1,8 MHz to 50 MHz bands, using a long wire element
• 2-way power sources using alkaline batteries or 13.8 V DC (13.8 V DC should be taken directly from an external power supply, not through the IC-705.)
• Latching relays used for saving power consumption
• IP54 dust-protection and water-resistant construction for outdoor use
• Compact design that neatly fits in the optional LC-192 multi-function backpack
• Supplied accessories: Coaxial cable (2 m, 6.6 ft, BNC connectors, between AH-705 and IC-705) • Control cable (2 m, 6.6 ft, between AH-705 and IC-705) • Terminal connector, PL-259 to binding post socket adapter for a long wire antenna • Mounting bracket (with a screw and washer) • DC plug
• The AH-710 is a complete preassembled multi-band, folded dipole. It is designed to work with any of the Icom ham HF transceivers as well as Marine transceivers. The AH-710 can be installed as a Flat Top or an Inverted V configuration. The antenna comes with 30m of coax cable with PL-259's at each end. One end of which plugs into the SO-239 centre-feed of the antenna and the other end to the radio socket. It also comes with 10m of white nylon halyard and waterproof tape.
• 1.9 - 30MHz
• Type Terminated Folded Dipole
• Power 150W PEP
• VSWR 1.9-18MHz <2:1, VSWR 9-18MHz <2.5:1 * Length 24m
• Covers 2,5-30MHz (amateur band)
• OPC-2321 is required
• For IC-R8600 base station communication receiver
• Wideband antenna: 100-3335 MHz
• Automatic HF antenna tuner
• Frequency coverage: 1,6-30Mhz (with 7m or longer antenna element)
• Power supply requirement: 13,6Vdc
• Current drain: 2A
• Weight: 2,5kg
• Antenna connector: SO239
• VHF airband antenna (118.000-136.975Mhz)
• BNC connector
• VHF amateur antenna (144-146Mhz)
• BNC connector
• Supplied accessorie for Icom IC-SAT100 radio
• Antenna with SMA connector
• VHF antenna (136-150 MHz)
• Approved rating: ATEX II 2G E Ex ib IIA T3
• VHF/UHF dualband antenna
• Tx: 144/440, Rx: 495Khz - 1300Mhz
• SMA female connector
• UHF antenna (400-470 MHz)
• Approved rating: ATEX II 2G E Ex ib IIA T3
• VHF antenna (150-174 MHz)
• Approved rating: ATEX II 2G E Ex ib IIA T3
• VHF marine antenna (156.000-161,450 MHz)
• VHF cuttable antenna (136-174 MHz)
• UHF antenna (380-430 MHz)
• UHF antenna (400-450 MHz)
• VHF antenna (136-150 MHz)
• VHF antenna (136-150 MHz)
• UHF antenna (430-480 MHz)
• UHF antenna (450-490 MHz)