Gas Leak Detector

If you heat or cook with gas, you will need a gas leak detector for safety. Why? Because they will alert you if there is a gas leak in your home. If the leak is mild, you may have a headache or nausea, but if the concentration of gas in the air is higher, it can be fatal. Read more...

Change product view Order products by:
Filter products
By availability
On stock (1)
Pre-order (0)
By brand
Emos (1)
By price
€ -
1 products in total, page 1: 1 - 1 / 11
NEW

• Signalling volume: >85 dB at a distance of 1 m
• Protection: IPX2D
• Power supply: 230 V mains
• Operating temperature: -10 °C to 40 °C
• Operating humidity: 0-95 %
• Signal type: optical and audible
• Mounting type: wall-mounted or free-standing
• Lifetime: 5 years
• Dimensions: 36,3 × 117,4 × 77,4 mm

Gross price (including 27% VAT): 39.56€ (Net price: 31.15€)
1 products in total, page 1: 1 - 1 / 11
Especially if a major gas leak occurs while we are asleep. But that's not the only reason we need to be careful not to let the gas leak, it's also because in that room, a tiny spark is enough to send the whole building flying. In a condominium, this can even endanger other people's homes.


This is why a gas leak detector not only looks out for your own safety, but also for the safety of those around you. We should not skimp on purchasing this device, as they are real life savers. But we should also be careful about the gas we use. Mains or cylinder.

What is a gas leak detector?

These devices are very similar to smoke alarms in their function, design and operation. They sound an alarm if the concentration of gas in the air in a room is too high. They are mainly used in kitchens and boiler rooms.

How does a gas leak detector work?

Most gas leak detectors work as follows. There is a continuous flow of air into the room inside the appliance where there is a glow wire. As soon as gas flows inside the appliance, the wire ignites and a slight burn occurs. This combustion leads to an increase in temperature and pressure, which is detected and immediately alarmed by the electronics inside the appliance.

When do we need a gas leak detector?

This type of device is needed when cooking with gas or heating with gas. As electric ovens are becoming more common these days, few people use bottled gas for cooking. This is certainly due to the fact that people in modern society prefer to focus on convenience. Macera to go out and bring home a full gas cylinder.


In addition, you have to connect the gas stove socket so that it doesn't leak. And heating with gas is nowadays worthwhile for people who use little gas, i.e. who have a small property. Those with larger houses use either solar panels or heat pumps.

What gases does the gas leak detector detect?

When we heat with gas, we burn ethane and methane to keep our homes warm. If you are cooking with gas, you will have liquefied gas, i.e. propane and butane in the tank. This type of gas is not only used for cooking, but also in caravans on trips.

Where to install the gas leak detector?

The gas leak detector is best placed near the source of the gas. If you have a separate boiler room, it should be located there, if you have installed the boiler in the interior of your apartment or house, it should be located in the vicinity. For example in the kitchen, or in the storage room, or in the bathroom.


Ethane and methane are lighter than air, so you should place the appropriate gas detector above the potential source of leakage, on the wall about 30-50 cm from the ceiling. However, for heavier than air gases such as propane and butane, the gas detector should be installed lower down, as they travel downwards. For this reason it is advisable to place it close to the stove, but if possible a little lower.


When deciding on the location, you should also consider where there is a power socket nearby, as these appliances do not run on batteries, but on 230 V mains electricity. If your home has both ethane and methane, as well as propane and butane gas, you will need two detectors.

If you have a gas detector in your home, you will need two detectors.

Why choose an Emos gas leak detector?

The gas leak detectors manufactured by the brand have a 5-year lifespan, which guarantees us sufficient safety. Emos gas leak detectors indicate the danger at 85 dB, a volume so loud that it will wake us from our sleep if we hear it. These devices emit both optical and audible alarms, giving us two ways to signal danger. The protection class of the alarm device manufactured by the brand: IPX2D. Make sure that the temperature in the room where you place it is between -10°C and 40°C and the humidity is between 0-95%.