Nauticast GPS Antennas

The Nauticast GPS antenna category includes GPS antennas for which the main selection criteria are the operating frequency, supply voltage, cable type and length, connector configuration, and mechanical mounting method. The documented technical parameters include a frequency of 1575.42 MHz +/- 3 MHz, 5 V supply voltage, RG58 cable, TNC male connector, and mast or deck mounting options. Read more...

Change product view Order products by:
Filter products
By availability
On stock ()
Pre-order (1)
By brand
Nauticast (1)
By price
€ - €
1 products in total, page 1: 1 - 1 / 11

• Voltage: 5V
• Frequency: 1575.42 MHz +/- 3 MHz
• Cable type: 5m RG58 cable
• Connector: TNC male
• Mounting: 1"-14 threads (board mount bracket included)
• Dimensions: 96mm (diameter) × 126mm (length)
• Weight: 270g
• Recommended use: for Nauticast A2 transponder

Gross price (including 27% VAT): 70.99€ (Net price: 55.90€)
1 products in total, page 1: 1 - 1 / 11

Nauticast GPS antenna - which technical parameters should be checked?

When selecting a Nauticast GPS antenna, the frequency and supply voltage are fundamental parameters to verify. The documented operating frequency is 1575.42 MHz +/- 3 MHz, while the specified supply voltage is 5 V. These values should always be compared with the technical requirements of the navigation or marine electronics equipment to which the antenna will be connected.

Nauticast GPS antenna and satellite positioning

The GPS antenna in this category is specified for a frequency of 1575.42 MHz +/- 3 MHz. During technical selection, this parameter should be considered separately from the connector, cable, and mechanical mounting characteristics. The documentation does not specify additional GNSS frequencies or compatibility with other satellite systems, so no such compatibility should be assumed for the category.

What cable and connector are used with the GPS antenna?

The documented configuration uses a 5 m RG58 cable and a TNC male connector. For compatibility checks, it is therefore not sufficient to verify only that the receiving equipment supports a GPS antenna. The equipment connection must also be mechanically compatible with the TNC male connector, while the 5 m cable length should be taken into account when planning the installation.

How can Nauticast GPS antenna connectivity be checked?

  • Check the 1575.42 MHz +/- 3 MHz frequency.
  • Compare the 5 V supply voltage with the requirements of the receiving equipment.
  • Verify compatibility with the TNC male connector.
  • Take the 5 m RG58 cable into account.


For an AIS system, marine GPS, or other navigation system, direct compatibility can only be determined together with the technical documentation of the relevant equipment. The technical data of the GPS antenna alone do not establish general compatibility with every marine electronics device.

GPS antenna mounting and physical design

The documented mechanical parameters include a diameter of 96 mm, a height of 126 mm, and a weight of 270 g. The antenna is specified for pole mounting on a 1"-14 threaded mast, and a deck mount option is also available. These parameters should be considered when checking the available installation space and mounting arrangement.

Nauticast marine GPS antenna mounting options

The 1"-14 threaded mast mount represents a specific mechanical requirement. If the existing mounting point uses a different thread or mounting method, compatibility must be checked separately. Deck mounting is also included among the documented installation options.

What should be considered when selecting an antenna for a navigation system?

We recommend checking the electrical, connection, and mechanical parameters separately when selecting a GPS antenna. The frequency, supply voltage, TNC male connector, RG58 cable, and mounting configuration together determine whether the antenna can be physically and technically matched to the intended system.

Nauticast GPS antenna - key parameters to check

  • Frequency: 1575.42 MHz +/- 3 MHz
  • Supply voltage: 5 V
  • Cable: 5 m RG58
  • Connector: TNC male
  • Diameter: 96 mm
  • Height: 126 mm
  • Weight: 270 g
  • Mast mounting: 1"-14 thread
  • Deck mount option

FAQ - Nauticast GPS antenna

  • What frequency is specified for the GPS antenna?
    The documented operating frequency is 1575.42 MHz +/- 3 MHz.
  • What supply voltage is required?
    The specified supply voltage is 5 V.
  • What connector type is used?
    The documented connector type is TNC male.
  • What cable is supplied with the antenna?
    The documented cable is a 5 m RG58 cable.
  • What mounting options are specified?
    A 1"-14 threaded mast mount and deck mounting are included among the documented options.
  • Is the antenna compatible with every AIS system?
    General AIS compatibility cannot be established. The technical data of the receiving equipment must be compared separately with the antenna parameters.

Summary

When selecting a Nauticast GPS antenna, the main documented parameters to check are the 1575.42 MHz +/- 3 MHz frequency, 5 V supply voltage, RG58 cable, TNC male connector, and mechanical mounting arrangement. Compatibility should always be evaluated together with the technical requirements of the navigation or marine electronics system to which the antenna will be connected.