Amber LED Lightbar

- further categories

In the case of a warning signal, an amber-coloured light signal must be used, no other shade is permitted by law. A warning device is defined in the regulation as a device that emits a flashing amber light when mounted on a vehicle in a fixed or mobile (movable) mode. Such a lamp is a yellow LED lightbar. Flashing lights and light-bridges emitting an amber light signal shall not emit an acoustic signal. A yellow LED lightbar shall comply with photometric parameters R65 and EMC standard R10. Read more...

Change product view Order products by:
Filter products
By availability
On stock (2)
Pre-order (14)
By brand
Hella (1)
Sirena (6)
SoundOff Signal (1)
Strobos (8)
By price
€ -
16 products in total, page 1: 1 - 16 / 161

• Approved amber light bar with permanent mount
• LED rotating effect amber light bar with polycarbonate dome and aluminum profile
• Supplied with 4 optical modules that each includes 8 pcs LED light soure
• Maximum current: 0.8A @ 12Vdc
• Dimensions: 153mm height, 755mm width, 140mm depth
• Revolutions per minute: 130 RPM (+/- 10)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• This product is also available with flashing effect LED light
• The E-Tube light bars are avalable with various lengths and mount types with halogen or LED light sourse
• The picture and the price refers to the 12/24Vdc, permanent mount, rotating effekt LED version 21363 article number

Gross price (including 27% VAT): 695.33€ (Net price: 547.50€)

• Approved amber light bar with permanent mount
• Rotating amber light bar with polycarbonate dome and aluminum profile
• Supplied with 4 pcs 12Vdc halogen H21W bulb
• Maximum current: 7A @ 12Vdc
• Dimensions: 153mm height, 1185mm width, 140mm depth
• Revolutions per minute: 170 RPM (+/- 30) (12V)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product is also available with 24Vdc bulb
• The E-Tube light bars are avalable with various lengths and mount types with halogen or LED light sourse
• The picture and the price refers to the 12Vdc, permanent mount, halogen version 21365 article number

Gross price (including 27% VAT): 581.60€ (Net price: 457.95€)

• Approved amber light bar with permanent mount
• LED rotating effect amber light bar with polycarbonate dome and aluminum profile
• Supplied with 4 optical modules that each includes 8 pcs LED light soure
• Maximum current: 0.8A @ 12Vdc
• Dimensions: 153mm height, 1185mm width, 140mm depth
• Revolutions per minute: 130 RPM (+/- 10)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• This product is also available with flashing effect LED light
• The E-Tube light bars are avalable with various lengths and mount types with halogen or LED light sourse
• The picture and the price refers to the 12/24Vdc, permanent mount, rotating effekt LED version 21369 article number

Gross price (including 27% VAT): 854.75€ (Net price: 673.03€)

• Approved amber light bar with permanent mount
• Rotating amber light bar with polycarbonate dome and aluminum profile
• Supplied with 4 pcs 12Vdc halogen H21W bulb
• Maximum current: 7A @ 12Vdc
• Dimensions: 153mm height, 1620mm width, 140mm depth
• Revolutions per minute: 170 RPM (+/- 30) (12V)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product is also available with 24Vdc bulb
• The E-Tube light bars are avalable with various lengths and mount types with halogen or LED light sourse
• The picture and the price refers to the 12Vdc, permanent mount, halogen version 21373 article number

Gross price (including 27% VAT): 741.02€ (Net price: 583.48€)

• Approved amber light bar with permanent mount
• LED rotating effect amber light bar with polycarbonate dome and aluminum profile
• Supplied with 4 optical modules that each includes 8 pcs LED light soure
• Maximum current: 0.8A @ 12Vdc
• Dimensions: 153mm height, 1620mm width, 140mm depth
• Revolutions per minute: 130 RPM (+/- 10)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• This product is also available with flashing effect LED light
• The E-Tube light bars are avalable with various lengths and mount types with halogen or LED light sourse
• The picture and the price refers to the 12/24Vdc, permanent mount, rotating effekt LED version 21377 article number

Gross price (including 27% VAT): 1,014.16€ (Net price: 798.55€)

• Multifunctional amber bar for traffic control operations with permanent M6 mount
• LED amber bar with polycarbonate lenses and aluminum profile
• Supplied with 9 optical modules that each includes 3 pcs LED light soure
• Maximum current: 3.5A @ 12Vdc
• Dimensions: 58mm height, 1200mm width, 45mm depth
• 6 differenc flashing patterns with the supplied control unit
• Light intensity: 2000 Cd(p)
• Confirms with IP55 standard
• CE and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• This product is also available in smaller size with 7 optical modules
• The picture and the price refers to the 12/24Vdc, 9 optical module version 74087 article number

Gross price (including 27% VAT): 610.12€ (Net price: 480.41€)

• unique design and exceptional durability
• Only 60 mm high, 21 cm wide
• 3 leds/modul, 3W/led
• 8 modules
• Low consumption: 2A
• 4 flash modes
• Frequency of flashing: 2Hz
• Certficates: R65, R10
• The set includes all the elements needed to mount the lighting (cables, rubber pads for permanent assembly with screws and a switch)
• Lengths: 110 cm
• Amber/amber

Gross price (including 27% VAT): 485.69€ (Net price: 382.44€)

• Unique design and exceptional durability
• Only 90 mm high, 21 cm wide
• 4 leds/modul, 3W/led
• Voltage: 12/24V
• Change flash modes
• Certficates: E9 R65 TA1; E20 R10; E9 R26
• The set includes all the elements needed to mount the lighting (cables, rubber pads for permanent assembly with screws and a switch)

Gross price (including 27% VAT): 438.07€ (Net price: 344.93€)

• Power supply: 12/24V
• Dimensions: 5 cm (height) x 42 cm (length) x 20 cm (width)
• Aluminium cover in grey colour
• Magnetic holders included
• Compliance certificate: R10, R65

Gross price (including 27% VAT): 171.40€ (Net price: 134.96€)

• Voltage: 10-30V
• Total current consumption approx.: 6.1 A (12 V)/ approx. 2.8 A (24 V)
• Max. power: 70 W
• Lens colour: yellow
• Polycarbonate dome
• Fixing: screw
• Connecting cable length: 500 mm
• Functions: rotating or flashing light (user defined flashing pattern)
• IP 6X/IP X4K/IP X9K protection
• Compliance certification: R65 and R10

Gross price (including 27% VAT): 274.76€ (Net price: 216.35€)

• Input power: 10-16 Vdc (standard)
• Length: 1380mm
• 12 LED modules
• Colour: yellow dome
• Material: aluminium frame, polycarbonate dome
• Mounting type: recessed
• Fixed base
• EMC/ECE R65, R10 certificate

Gross price (including 27% VAT): 1,466.16€ (Net price: 1,154.45€)

• Number of LEDs: 48 3W/LED
• 8 modules
• Voltage: 12/24V
• Low power consumption: 2A
• 4 types of flashing pattern
• Flashing frequency: 2Hz
• Colour: amber
• Compliance certificate: R10, R65
• Dimensions: 110 cm (length) x 6 cm (height) x 21 cm (width)
• Additional equipment: rubber pads with screws / switch box

Gross price (including 27% VAT): 1,047.86€ (Net price: 825.08€)

• Voltage: 12-24 V
• 22ML version - full LED, 22 LED modules, 4 LED/3W, total 88 LED
• LED colour: yellow
• Lens colour: water clear
• Dimensions: 110 cm (length) x 3.5 cm (height) x 21 cm (width)
• Accessories: rubber pads with screws and connection box
• Compliance certificate: E20 R10, E9 R65

Gross price (including 27% VAT): 895.57€ (Net price: 705.17€)

• 4 LEDs/module, 6 3W LEDs each
• BP - white middle part
• Multiple flashing modes
• Power supply: 12/24V
• Colour: yellow/yellow
• Dimensions: 160 cm (height) x 9 cm (height) x 21 cm (width)
• Compliance certificate: E20 R10, E9 R65
• The kit includes the necessary rubber mounting screws and cables for installation

Gross price (including 27% VAT): 438.07€ (Net price: 344.93€)

• 24 LEDs, 3W each, in 4 LED modules
• Multiple flashing modes
• BP- white centre section
• Power supply: 12/24V
• Colour: yellow
• Dimensions: 110 cm (length) x 9 cm (height) x 21 cm (width)
• Compliance certificate: R10, R65
• Set includes rubber mounting screw and cables for installation

Gross price (including 27% VAT): 400.16€ (Net price: 315.08€)

• 48 LEDs, 3W each, in 8 LED modules
• Multiple flashing modes
• BP- white centre section
• Power supply: 12/24V
• Colour: yellow
• Dimensions: 110 cm (length) x 9 cm (height) x 21 cm (width)
• Compliance certificate: R10, R65
• Set includes rubber mounting screw and cables for installation

Gross price (including 27% VAT): 552.44€ (Net price: 434.99€)
16 products in total, page 1: 1 - 16 / 161

.

What sizes of Amber LED Lightbar are available in the DND Telecom webshop?

When installing a yellow LED lightbar, one of the important considerations in the selection is the roof width of the vehicle and the features you want to display. Yellow LED lightbars are usually available from most manufacturers in sizes between 60-180 cm. There are also mini amber LED lightbars, which are usually 30-40 cm in length, available in both magnetic and fixed screw-on versions. Yellow lights larger than 40 cm are recommended to be mounted with a fixed mount, as they can be accident-prone due to increased weight and air resistance.

What light sources do modern Amber LED Lightbar have?

The halogen and xenon light sources used in the past have now been completely replaced by LED technology, which offers a long service life thanks to its lower energy consumption. In most cases, the yellow beacon is now of advanced LED module design, so its configuration can be varied according to the user's needs. For amber beacons in Europe, the number of modules is not specifically defined, but it is important that the flashing pattern of more than two modules should already be synchronised.

What material are Amber Lightbar made of?

The bore of the LED lightbars is made of polycarbonate, which has a high hardness and is also UV resistant. The base of amber LED lightbars, on the other hand, is mostly made of aluminium. Both materials are lightweight, which is also important to ensure that the LED lightbar does not put too much strain on the overall weight of the vehicle carrying the warning sign. Because cars with amber lights are on the road in all weather conditions, the dome and base will certainly retain their shape and colour between -40 and +60 degrees Celsius, and will also withstand more severe external stresses.

What is the life expectancy of Amber Lightbar?

The amber LED lightbars available in the DND Telecom webshop combine modern design with a wide range of features and high performance LED lighting technology. These yellow warning signs are IP55 dust and water resistant. These types of LED lightbars are made of quality materials that retain their shape and colour over time. The minimal height not only ensures low air resistance and reduced noise levels, but this detail also ensures that these beacons have a long life expectancy. Both their UV resistance and their perfect assembly ensure that SounfOff, Hella, Strobos and Sirena brand LED lightbars will operate trouble-free for many years.

How are Amber LED Lightbar installed?

Amber LED lightbars must be installed on the roofs of vehicles. Its location depends on the specific type of vehicle. You can install a yellow warning sign with a magnet, but there are also a number of fixed versions available. If such a light bridge is chosen, the kit includes the necessary rubber-bonded screw fixing and the necessary cables. Care must also be taken to ensure that the amber indicators are properly visible from all sides of the vehicle and that the light bridge is positioned at the highest point of the vehicle. No special tools are required for installation. However, fitting them will require manual dexterity, so we have provided installation instructions to help you get the job done.

What features do Amber LED Lightbar have?

The flashing pattern of yellow LED lightbars is usually pre-programmed, so that the user or the installer of the LED lightbar can choose the right one based on the regulations in the country. The LED lightbars available in the DND Telecom webshop have 4 or 6 different flashing patterns. When assembled, the number of modules depends on the size of the LED lightbar and the lighting effect required by the application. Control of the LED lightbar, i.e. switching it on and off and changing the type and mode of flashing, is done from a separate switch or by means of a switch module.

Ability to use the Amber Lightbar

The range of persons entitled to use a yellow warning light is very wide because of the specific tasks involved. The legislation basically distinguishes between two groups. Those who do not need an official permit to fit it and those who may be granted an official permit if the purpose of the vehicle operation justifies it. Examples of such users are:

  • road builders and waste management companies carrying out road or public works construction, cleaning, maintenance (repair), collection of municipal/municipal waste, separate collection of waste
  • public maintenance and wheel-clamping vehicles, i.e. vehicles regularly used for the official removal of vehicles or the application of wheel clamps
  • property protection and vigilante service, which means a vehicle used for the transport of money and valuables in the context of the protection of persons and property or operated by a financial services organisation, or a vehicle used for this purpose in the performance of a vigilante service in public areas
  • a vehicle transporting or accompanying radioactive material
  • vehicles transporting materials on the road section concerned during road construction
  • vehicles exceeding the permitted length or width (oversize)
  • a vehicle accompanying an oversized vehicle
  • a vehicle regularly towing a vehicle which has broken down, if the vehicle is actually towing the vehicle
  • a vehicle carrying out radio control, radio detection, radio monitoring, disturbance investigation and measurement service activities

.

In some cases, it is not necessary to apply for a special official authorisation to use a amber LED lightbar, but you must comply with the conditions described in the legislation. The scope of those who may use yellow LED lightbars is regulated by IRM Decree 12/2007 (13.III.).