Icom D-Star Digital Radio Repeater

Icom amateur repeaters are designed for D-STAR digital and analog FM radio communication. The category includes repeaters for the VHF, UHF and 1.2 GHz frequency bands, with integrated control, network connectivity and a 19-inch rack-mountable design. The 1.2 GHz version also supports DD data mode. Read more...

Change product view Order products by:
Filter products
By availability
On stock ()
Pre-order (3)
By brand
Icom (3)
By price
€ - €
3 products in total, page 1: 1 - 3 / 31

• Tx/Rx: 144-146 MHz, DV/FM
• Compatible with ID-RP2C controller
• Integrated Controller Function
• 25W RF output power
• Digital GMSK modulation
• CW ID/Voice ID transmitter
• SD card slot for firmware update, saving setting data and FM mode Voice ID audio
• 10 MHz reference signal input

Gross price (including 27% VAT): 1,853.23€ (Net price: 1,459.24€)

• Tx/Rx: 430-440 MHz, DV/FM
• Compatible with ID-RP2C controller
• Integrated Controller Function
• 25W RF output power
• Digital GMSK modulation
• CW ID/Voice ID transmitter
• SD card slot for firmware update, saving setting data and FM mode Voice ID audio
• 10 MHz reference signal input

Gross price (including 27% VAT): 1,853.23€ (Net price: 1,459.24€)

• Tx/Rx: between 1240-1300 Mhz, DV/DD/FM
• Compatible with ID-RP2C controller
• Integrated control function
• Maximum 10W RF output power
• Optional UX-262 LTE unit for wireless internet connection
• Data transfer rate of 4.8kbps (DV) and 128kbp (DD)
• Digital/analog mixed mode operation
• High duty cycle operation

Gross price (including 27% VAT): 1,904.64€ (Net price: 1,499.71€)
3 products in total, page 1: 1 - 3 / 31

Icom amateur repeater with D-STAR DV/FM operation

The units support D-STAR DV and analog FM modes. In mixed mode, they can receive both DV and FM signals and retransmit the received signal in the same mode. Dedicated DV or FM operation can also be configured. For FM operation, CTCSS, DTCS codes and a 1750 Hz tone can be set.

Which frequency bands are available for Icom amateur repeaters?

The category includes 144-146 MHz VHF, 430-440 MHz UHF and 1240-1300 MHz 1.2 GHz units. The VHF and UHF versions support 4.8 kbps DV data transmission, while the 1.2 GHz version also provides 128 kbps DD data communication.

D-STAR repeater with integrated controller

The integrated controller allows the RF module to operate as a standalone repeater. Multiple repeaters can be interconnected via Ethernet cable, while dedicated repeater ports provide data communication between units. Connection to an external repeater controller is also supported.

What network and LTE functions are available?

The system can be connected to a gateway server, with up to four modules connected to one server. With an optional LTE unit, LTE network and Internet connectivity can also be established. A data SIM card and a static global IP address are required.

RF signal processing and technical design

The VHF and UHF versions use an RF Direct Sampling receiver system, while the 1.2 GHz version uses Down Conversion IF Sampling. Signal processing is performed digitally by FPGA. The units are designed for 19-inch rack installation, have a height of 2U, measure 482 x 88 x 275 mm and weigh approximately 6 kg.

Which connections are available on Icom amateur repeaters?

The units include a 13.8 V DC power input, LAN connectors, controller and repeater ports, a 10 MHz reference signal input, USB, service connector, and separate transmit and receive antenna connectors. The nominal antenna impedance is 50 ohm and the connector type is N-Type.

Documented functions and limitations

  • D-STAR DV and analog FM operation.
  • Integrated controller for standalone repeater operation.
  • SD card support for firmware updates and settings management.
  • The 1.2 GHz version supports 128 kbps DD data communication.

DD data mode is available only on the 1.2 GHz version. The D-STAR gateway function cannot be used with FM signals. The optional LTE unit requires a data SIM card and a static global IP address.

FAQ about Icom amateur repeaters

  • Can analog FM mode be used?
    Yes. The units support both D-STAR DV and analog FM operation.
  • Is DD data mode available?
    Yes. The 1.2 GHz version supports 128 kbps DD data communication.
  • Is an external controller required for standalone operation?
    No. The integrated controller enables standalone repeater operation.
  • Can an SD card be used?
    Yes. It can be used for firmware updates, importing and exporting settings, and Voice ID audio data.

Summary: Icom D-STAR amateur repeaters

The Icom amateur repeater category includes VHF, UHF and 1.2 GHz units supporting D-STAR and FM operation. Documented differences include the operating frequency band, availability of DD data mode and RF output power.