Icom
Icom is one of today's best-known brands of wireless communication devices. Since its inception in 1964, the company has evolved considerably to offer the innovative range of products it does today. The brand is a trusted manufacturer of communication devices such as walkie-talkies, industrial two-way radios, amateur radios, wifi transceivers, communication receivers and radios for navigation and aviation. Read more...
• Equipped with 8-position rotary clip
• Connector information: 2 pin Screw attached type
• Cable Length: 500 mm
• IP67 rated
• Headset Adapter cable for interconnection with a third-party headset
• Cable Length: 471 mm
• Connector information: 5.23mm/3P socket, 6.3mm/2P socket and φ3.5mm stereo socket
• Vehicle mounting kit DIN
• Picture is one of similar product
• Standard type belt clip
• 115/230V AC- 13,8V DC 10A Power Supply
• Mounting bracket for PS-1508.001 power supply and IC-A120E radio
• 7.2 V / 3150 mAh Li-ion battery
• BC-240 is needed for charging
Special gross price: 81.01€ (Net price: 63.79€)
• Connector information: 14 pin spring type
• IP67 dust and water resistant handheld microphone
• Waterproof microphone (IP68) can be used while in rain
• Equipped with an emergency switch at the top
• Increased speaker-microphone volume depends on the combination of the transceiver and microphone
• Cable Length: 300 mm
• Connector Information: 14 pin spring type; Φ3.5 mm earphone jack
• Tie clip microphone with sub PTT button
• Equipped with 2.5 earphone jack
• Cable Length: 1000 mm
• IP54 (Except for earphone jack)
• DTMF microphone with sub PTT button
• 3,5mm jack socket for headphones
• Equipped with an emergency switch at the top
• Cable Length: 460 mm
• IP67 (Rating of waterproofing is equivalent to the rating of the radio it is connected to)
• Alligator type belt clip for IC-F52D/IC-F62D and IC-M85E radio
• Frequency range: 1616 MHz to 1626.5 MHz
• Install the antenna unit (with RF unit) to the rooftop, and use the radio from a vehicle, indoors, or even from the basement
• Easy wiring works between the antenna unit (with RF unit) and main unit using a LAN cable (Cat 5e), (User supplied LAN cable is required to replace the supplied 20m LAN cable)
• Compatible with both 13.2 V DC and 26.4 V DC vehicle power source
• Dust- and water protection: antenna unit with RF unit IP67, main unit IP54, microphone IP55
• 1500 mW powerful audio output
• Voice Recording function
• Built-in Bluetooth capability
• Multiple language display ( English, Chinese, French, Japanese, and Spanish)
• Integrated GPS receiver shows received signal position
• Short Data Message
• AES 256-bit encryption for security
• Tested to the MIL-STD-810 environmental tests
• Frequency range: 1616.02–1626.48 MHz (Uplink/Downlink), 1575.42–1605.40 MHz (Downlink, GNSS L1 Band)
• In-Building Repeater for Iridium Satellite Communications
• Relays Iridium and GNSS signals, and provides a solution for satellite communications indoors and mobile applications
• Indoor coverage: Maximum 5 m
• RF gain level can be adjusted on the front panel (40 to 50 dB)
• Compact design offers flexible installation: 265 × 55 × 170 (W × H × D, mm)
• Not only satellite PTT (IC-SAT100), but also Iridium satellite phones and SBD (Short Burst Data) service can be used
• Attention: NO T/A, No CE marking available. Designed for non-EU region and/or Governmental user who does not require any kind of Type Approvals
• Rapid multi-charger for BP-300 battery packs
• Up to six battery packs can be simultaneously charged
• Power Supply Voltage: 12.0 ー 16.0 V DC
• Overcharge Protect Timer: 11.5 Hours (at rapid charging)
• Standard accessory: BC-157S AC adapter
• Coaxial cable for AH-40
• Cable Length: 5 m
• Connector: 2 pin Slim L type and flat 4 pin connector
• Charger insert for BC-214N charger and IC-SAT100 satellite radio
• UHF cuttable antenna (380-520 MHz)
• The picture shows a similar product
• With SMA connector
• Frequency coverage: 136-174MHz
• 128 programmable channels, 8 Zones
• Full-Keypad
• Powerful 1500mW audio output
• Lone worker, Man down and Motion/Stationary detection function with built-in motion sensor
• Integrated IDAS digital system (NXDN or dPMR)
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Maximum 5W RF output power
• Confirms with IP54 standard (waterproof and dust-tight protection)
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Supplied accessories: 2280mAh Li-ion battery, antenna, belt clip and rapid charger
• Frequency coverage: 400-470MHz
• 128 programmable channels, 8 Zones
• Full-Keypad
• Powerful 1500mW audio output
• Lone worker, Man down and Motion/Stationary detection function with built-in motion sensor
• Integrated IDAS digital system (NXDN or dPMR)
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Maximum 5W RF output power
• Confirms with IP54 standard (waterproof and dust-tight protection)
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Supplied accessories: 2280mAh Li-ion battery, antenna, belt clip and rapid charger
• Frequency coverage: 136-174MHz
• High-resolution colour LCD display
• 32 programmable channels, 2 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• The set does not include a charger or antenna!
• Frequency coverage: 380-470Mhz
• High-resolution colour LCD display
• 32 programmable channels, 2 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• The set does not include a charger or antenna!
• Alligator type belt clip for IC-SAT100 radio
• Alligator type
• For Icom transceiver radio type IP110H
Icom wireless communication devices are all made in Japan
Icom Inc. is one of the companies for which quality has been more important than cost reduction. The company did not move production to countries that would produce its amateur, commercial, marine and aviation radios at lower cost. The brand felt it was essential that its products continued to be labelled "Made in Japan". It therefore kept 100 percent of its manufacturing base in Japan. But production was not only kept in the mainland, it was also significantly improved.
Icom's Arida plant has had an advanced manufacturing system for many years. For example, since 2019, industrial robots have been assembling the communication devices manufactured by the brand. But the company is also involved in a number of collaborations. As early as 2007, it signed a partnership agreement with KDDI, and a few years later the company's management decided to work closely with Ageet and NTT West Japan. But Icom acquired Macrotechnos Co Ltd last year to put even more emphasis on software development within the company.
Icom is a global brand
Icom is known around the world today as a trusted brand dedicated to two-way radio communications. The company's transceivers are used by many professional organisations around the world, including the US Department of Defense. The brand has one of the widest ranges of models in the professional commercial radio market. Icom currently offers both dPMR and NXDN based transceivers, including the so-called dPMR446 transceivers for unlicensed use, as well as professional two-way radio devices for the URH band. Of course, we also offer ATEX versions and analogue and digital licence-free radios.
Icom's worldwide sales and service network
Icom Inc. sells its amateur radios and other wireless communication devices in more than 80 countries around the world. The company focuses not only on sales, but also on service. To this end, the company has a well-established service network. In Hungary, DND Telecom Kft. has been the Hungarian importer of Icom Inc. for more than 20 years. Thanks to this close cooperation, the entire Icom portfolio is available in the DND Telecom webshop, including walkie-talkies, industrial VHF radios, amateur radios, wifi transceivers, radios for aviation and shipping, etc.
At our service centre, we also carry out warranty and out-of-warranty repairs on branded communication devices, all using genuine factory Icom parts of course. If necessary, we return the devices to Icom, where we will carry out the necessary tests and repairs. In addition, we are happy to program and install Icom products.