Icom
Icom is one of today's best-known brands of wireless communication devices. Since its inception in 1964, the company has evolved considerably to offer the innovative range of products it does today. The brand is a trusted manufacturer of communication devices such as walkie-talkies, industrial two-way radios, amateur radios, wifi transceivers, communication receivers and radios for navigation and aviation. Read more...
• Frequency range: 2300 Mhz - 2450 Mhz
• Gain: 4 dBi
• VSWR: 1.5 or less
• Temperature range: -25℃ ~ 55℃
• Dimensions: 76.8 x 200 x 76.8 mm
• Weight: 228 g
• IP rating: IP67
• Accessories: Mounting bracket and U-bolt clamp kits
• Collinear antenna for IC-905
• Output/input connector: SMA-R
• Frequency range: 5650 Mhz - 5925 Mhz
• Gain: 5 dBi
• VSWR: 1.5 or less
• Temperature range: -25℃ - 55℃
• IP rating: IP67
• Accessories: bracket and U-bolt mounting kit
• Dimensions: 76.8 x 200 x 76.8 mm
• Weight: 228 g
• Collinear antenna for IC-905 radio and CX-10G power amplifier
• Frequency range: 10 Ghz - 10.5 Ghz
• Output/input connector: SMA-R
• Amplification: 5 dBi
• VSWR: 1.5 or less
• Temperature range: -25℃ - 55℃
• Dimensions: 76.8 x 200 x 76.8 mm
• Weight: 228 g
• IP rating: IP67
• Accessories: bracket and U-bolt mounting kit
• Parablic antenna for IC-905 and CX-10G
• Splash plate feed antenna
• Frequency range: 10 Ghz - 10.5 Ghz
• Gain: 31 dBi typical
• Maximum input power: 10W
• Polarization: Vertical
• Inpedance: 50 Ohm
• Connector: SMA-J
• Accessories: Semi-rigid cable, pole clamps and hex head bolts
• Voltage: 12V
• Output power: 1.6-3.9999 MHz 85 W pep; 4.0-27.5000 MHz 125 W pep
• Built-in DSC watch-keeping receiver
• Distress button: simple digital alarm transmission
• Integrated GNSS receiver
• Two-minute instant replay memory
• Optional AT-141 automatic antenna tuner
• 4.3-inch wide-angle colour TFT display
• NMEA 2000, NMEA 0183/-HS connection
• IPX7 waterproof protection
• Voltage: 24V
• Output power: 1.6-3.9999 MHz 85 W pep; 4.0-27.5000 MHz 125 W pep
• Built-in DSC watch-keeping receiver
• Distress button: simple digital alarm transmission
• Integrated GNSS receiver
• Two-minute instant replay memory
• Optional AT-141 automatic antenna tuner
• 4.3-inch wide-angle colour TFT display
• NMEA 2000, NMEA 0183/-HS connection
• IPX7 waterproof protection
• Charging time : 5.5 hours with BC-263A power supply (not included)
• Power supply voltage: 5 V DC
• Extension cable for use with speaker-microphone (SAT100M)
• Cable Length: 2 m
• Battery charger for Icom IC-T10 transceiver
• For use with Icom CP-12L or Icom OPC-254L
• Input: 10-16 V DC
• Output: 7.5 V DC; 2.5 A
• For use with IC-905 controller and RF unit
• Waterproof connector cases
• Operates on 144, 430, 1200, 2400, 5600 MHz (all mode)
• The industry's first multiband 144 MHz to microwave transceiver
• SSB, CW, AM, FM, RTTY, D-STAR DV/DD and FM-TV (Amateur TV) modes
• Output power: 10W at 144, 430, 1200 MHz, 2W at 2400, 5600 MHz and 0.5W at 10 GHz (optional CX-10G required for 10 GHz operation)
• GPS-controlled oscillator for ultimate frequency stability
• Large touch screen with colour display
• microSD card interface (microSD card not supplied as standard)
• 500 memory channels divided into up to 100 groups
• USB Type-C connector
• TX and AFC (automatic frequency control) function
• Wireless Bluetooth connection to an Android device, even when using terminal mode and access point mode
• Dual operation between Terminal Mode and Simplex/Repeater operation
• Tx: 144-146 / 430-440MHz
• Rx: 108-174 / 375-479MHz
• Selectable 5/2.5/1/0.5/0.1W RF output power
• Modes of operation: FM, FM-N, WFM*, DV, AM*, AM-N* (*Rx only)
• Integrated GPS receiver
• Built-in D-Star mode
• Reception of VHF/UHF bands and FM radios
• IPX7 water resistance
• MicroSD card slot
• USB Type-C port for both charging and programming
• Tx frequency coverage: HF/50/70/144/430MHz
• Rx frequency coverage: 0,030-199,99 and 400-470MHz
• Maximum 100 RF output power
• Intuitive Touch Screen Interface
• 48,6 x 75,9 mm large resisitve touch screen display
• USB, LSB, CW, RTTY, AM, DV, FM, WFM mode
• D-STAR DV mode (digital voice + data)
• 495 regular memory channels and 900 D-STAR channels
• SD Memory Card Slot for Saving Data
• PC to radio programming / cloning cable with USB connector
• Replaceable side cover accessory for IC-F1000 and IC-F2000 radios.
• Headset connector external cover.
• Screws and gasket sold separately.
• Acoustic Type Earphone Microphone
• Acoustic PTT headset
• Spare ear tube set
• Shoulder strap for use with LC-183/LC-185/LC-195
• MMSI reset hardware key for IC-M330 radio with programming adapter card
• DG-3975 contains 2 connecters in attached
• The one is for the MMDI resting for M330GE and another is for adapter to connect the radios with the external device
Special gross price: 20.65€ (Net price: 16.26€)
• Tx: 0.030-60.00 MHz
• Rx: 0.1357-0.1378; 1.810-1.999; 3.500-3.800; 7.000-7.200; 10.100-10.150; 14.000-14.350; 18.068-18.168; 21.000-21.450; 24.890-24.990; 28.000-29.700; 50.000-52.000 MHz
• Large multifunction LCD display
• Connectable to wired home LAN network (gigabit ethernet required)
• Maximum 200W RF output power
• USB, LSB, CW, RTTY, PSK31/63, AM, FM mode
• Built-in automatic antenna tuner
• Design: L-type (90-degree) connector
• Connection: 10-pin
• Cable length: 150 mm
• Stable and reliable connection between CommandMic and radio
• Compatible microphones: HM-195B; HM-195GB; HM-229
• Examples of compatible radios: IC-M423GE; IC-M400BBE; IC-M510E/ IC-M510BB; IC-M506GE; IC-M605EURO; IC-M410BB
• Frequency coverage: 136-174MHz
• High-resolution colour LCD display
• 1024 programmable channels, 128 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• The set does not include a charger or antenna!
• Programming cloning software for IC-FR5300/IC-FR6300 and UR-FR5300/UR-FR6300 repeaters
• Frequency coverage: 380-470Mhz
• High-resolution colour LCD display
• 1024 programmable channels, 128 channel zones
• Integrated IDAS NXDN digital system
• Built-in Bluetooth and GPS receiver
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Digital voice recording
• Multiple controller configurations
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• The set does not include a charger or antenna!
Icom wireless communication devices are all made in Japan
Icom Inc. is one of the companies for which quality has been more important than cost reduction. The company did not move production to countries that would produce its amateur, commercial, marine and aviation radios at lower cost. The brand felt it was essential that its products continued to be labelled "Made in Japan". It therefore kept 100 percent of its manufacturing base in Japan. But production was not only kept in the mainland, it was also significantly improved.
Icom's Arida plant has had an advanced manufacturing system for many years. For example, since 2019, industrial robots have been assembling the communication devices manufactured by the brand. But the company is also involved in a number of collaborations. As early as 2007, it signed a partnership agreement with KDDI, and a few years later the company's management decided to work closely with Ageet and NTT West Japan. But Icom acquired Macrotechnos Co Ltd last year to put even more emphasis on software development within the company.
Icom is a global brand
Icom is known around the world today as a trusted brand dedicated to two-way radio communications. The company's transceivers are used by many professional organisations around the world, including the US Department of Defense. The brand has one of the widest ranges of models in the professional commercial radio market. Icom currently offers both dPMR and NXDN based transceivers, including the so-called dPMR446 transceivers for unlicensed use, as well as professional two-way radio devices for the URH band. Of course, we also offer ATEX versions and analogue and digital licence-free radios.
Icom's worldwide sales and service network
Icom Inc. sells its amateur radios and other wireless communication devices in more than 80 countries around the world. The company focuses not only on sales, but also on service. To this end, the company has a well-established service network. In Hungary, DND Telecom Kft. has been the Hungarian importer of Icom Inc. for more than 20 years. Thanks to this close cooperation, the entire Icom portfolio is available in the DND Telecom webshop, including walkie-talkies, industrial VHF radios, amateur radios, wifi transceivers, radios for aviation and shipping, etc.
At our service centre, we also carry out warranty and out-of-warranty repairs on branded communication devices, all using genuine factory Icom parts of course. If necessary, we return the devices to Icom, where we will carry out the necessary tests and repairs. In addition, we are happy to program and install Icom products.