Discontinued Icom Products

• Radio over IP Gateway (RoIP)
• Connects an analog radio (repeater or transceiver) with another radio over an IP network
• Bridge mode for point-to-point radio connection
• Selective call mode using a DTMF code
• Up to three radios can be connected to one VE-PG2
• Optional connection cables allow you to connect a transceiver or repeater easily
• Audio input/output and relay switch for public address, headset or external device connection
• Web-based configuration screen
• SNMP, SYSLOG, network monitoring function and call logging
• DNS client
• Automatically checks firmware update(Internet connection required)
• DTMF/5-Tone/MDC1200/BIIS1200 can be passed the IP network*

• Radio over IP Gateway (RoIP)
• Create one system with IP telephones, analogue telephones and two-way radios
• Site-to-site and site-to-multisite radiocommunication
• Connect you radionetworks together even though they are on different locations
• Analogue and digital radios can be interconnected
• Audio in / out interfaces on the back
• RC-FS10 dispatcher software can be connected
• Connect external device (signal-lamp, gate-opener, etc)

• AC adapter for Icom BC-133 charger

• AC adapter for BC-190 and BC-119N desktop chargers

• Rx: 0,5-29,9999MHz; Tx: 1,6-29,9999
• 3 types of controller configuration (controller attached, detached controller, command microphone) (The price may vary according to the configuration!)
• GPS receiver can be connected
• Built-in DSP processor
• ALE, selective call, SSB, AM, CW, data communication
• Maximum 125W RF output power
• Confirms with IP54 standard (dust-protection and water resistant)
• Equivalent to MIL-STD 810 C, D, E, and F requirements
• For export purpose only
• The price referres to command microphone version.

• Gateway software for D-Star amateur repeater
• Required operation system: Linux

• 3m DC power cable

• BC-213SE is required for use
• Charges BP-265 Li-ion battery pack in 2,5 hours

• Battery case for 6 x AA cells

• Battery case for 5 x AA cells

• Battery case for 6 x AAA cells

• Battery case for 5 x AAA cells

• VHF marine channels
• Maximum 25W RF output power
• ATIS and DSC channels with code sending
• Built-in GPS receiver with external antenna
• Integrated AIS receiver
• AquaQuake draining function
• Built-in active noise cancelling and external speaker amplifier
• Last call voice recording (max. 2 minutes)
• IPX8 waterproof protection
• Can be integrated into MarineCommander system
• MA-500TR AIS transponder can be connected
• This product refers to the rear microphone version

• Battery case for 6 x AA cells

• 3.7 V / 1590 mAh Li-ion battery

• 7.4 V / 1200 mAh Li-ion battery

• Battery case for 3 x AA cells

• 7.4 V / 1500 mAh Li-ion battery

• 7.4 V / 1900 mAh ATEX Li-ion battery
• ATEX mining protection: I M2 Ex ib I Mb
• ATEX gas protection: II 2 G Ex ib IIC T4 Gb
• ATEX dust protection: II 2 D Ex ib IIIC T110°C Db

• 7.2 V / 1570 mAh Li-ion battery
• Replaced with BP-280 battery

• 7.2 V / 2010 mAh Li-ion battery

• 7.2 V / 3210 mAh Li-ion battery

• 7.2 V / 1570 mAh Li-ion battery

• Battery case: AA(LR6) * 3 cell used

• Tx frequency coverage: HF frequencies
• Rx frequency coverage: 0,030-60,000MHz
• Maximum 200W RF output power
• High resolution multi-function LCD display
• USB, LSB, CW, RTTY,PSK31, AM, FM mode
• 101 programmable memory channels
• 110dB Dynamic Range
• Spectrum scope
• Advanced Functions for Skillful Operators