Icom IC-F6012 UHF Mobile Two-Way Transceiver Radio

More details:

• Simple operation for instant communication
• The P0-P3 programmable buttons allow you to customise the radio to suit your needs and convenience. The dedicated volume potmeter provides easy and quick operation.
• Built-in SEL 2/5, CTCSS, DTCS coder/encoder and DTMF autodial. DTMF decoding and automatic number identification (ANI) are available with the optional UT-108R DTMF decoder
• The integrated SEL5 code transmitter and receiver allows selective identification and calling. 
• The 5-Tone signalling (encoder/decoder) gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
• Channel spacing: 12.5/20/25Khz; PLL channel step: 2.5, 3.125Khz (VHF); 5, 6.25Khz (UHF)
• Limited MDC 1200 features and compatibility
• Optional voice scramble unit (UT-109R; UT-110R)
• Microphone hanger action programmable
• Power ON password
• The optional ACC cable allows you to connect with various external devices to control audio output, modulated signal input, remote channel control, horn honk and many more functions. OPC-1939 is a D-SUB 15-pin type and OPC-2078 is a D-SUB 25-pin type.
• New scanning features have been added allowing migration from other radio brands.
- Priority scan allows you to monitor one or two priority channels while scanning other non-priority channels.
- Tx channel programmable ... The Tx channel is the channel the radio transmits when the user pushes the PTT button while scanning. The Tx channel can be programmable per scanning list from start, last detected, priority and pre-programmed channels.
- Talk back function ... allows you to transmit on the detected channel when scanning stops or soon after scanning resumes, prior to the Tx channel setting.
- Talk back timer beep ... alerts you of the end of the talk back time with a beep sound.
- Nuisance delete ... Users can temporary skip a busy channel from the scanning list.
- Monitor key action ...A user can stop a scan when pushing the monitor button)
• Time-out-timer (TOT): The time-out timer limits continuous transmission time period to prevent accidental prolonged transmission.
• When the Lone Worker function is turned ON, and no operation is performed for the specified time period*, the transceiver enters the emergency mode, and then the countdown for the emergency call transmission starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly*. (*Depending on the presetting.)
• Equivalent to MIL-STD 810 C, D, E, and F requirements