Icom IC-F1000T VHF Two-Way Handheld Transceiver Radio

ICOM-782-999
/uploads/termek_pic/thumbs/ic-f1000std_2000std_.jpg

• Frequency coverage: 136-174MHz
• 128 programmable channels
• 8 characters LCD display and full keypad
• Powerful 1500 mW audio output
• Lone worker and man down function with built-in motion sensor
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Maximum 5W RF output power
• VOX function for hands-free operation
• Confirms with IP67 standard (waterproof and dust-tight protection)
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Li-ion battery and rapid charger supplied as standard

Gross price (including 27% VAT): 224.13€ (Net price: 176.48€)
Add to Cart Price Watch
You can ask for e-mail price notifications when the price of this product gets under a limit you specify. To use this feature you need to have a user account and to be signed in.

More details:

• A new high efficiency FET of the IC-F1000 / IC-F2000 series reduces consumption current and provides 14 hours* of operating time with the BP-279, 1485mAh Li-ion battery pack. (Tx: 5%; Rx:5%; Stand by:90%)
• Compact, slim design. The weight is only 240g with battery. Dimensions: 52,2x111,8x24,5mm.
• Easy to use due to the 7 main controls only. Transmit button, volume control and channel selector. This simple to use radio is ideal for high turnover environments and shift work where the radio is constantly passed from person to person. Additional 2 programmable function buttons are on the side of the radio. The LED lamp provides feedback for the user about the operation. (starting transmission, channel selection, etc.)
• The following features and settings are available with out any preprogramming: microphone gain, squelch level, beep level, ringer level.
• With the channel announcement function when you rotate the the channel knob, the radio announces the channel number. Convenient for making radio adjustements without having to look at the radio.
• The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.
• Due to the built-in motion sensor both of the man down and lone worker functions are available.
• When the Lone Worker function is turned ON, and no operation is performed for the specified time period*, the transceiver enters the emergency mode, and then the countdown for the emergency call transmission starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly*. (*Depending on the presetting.)
• The man down function allows special emergency call. When the transceiver has been left in a horizontal position for the specified time period, the transceiver enters the emergency mode, and then the countdown starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly.* (*Depending on the presetting.)
• Limited MDC 1200 features and compatibility.
• Maximum 128 channels can be programmed into radio.
• The 5-Tone signalling (encoder/decoder) gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
• Built-in SEL 2/5, CTCSS, DTCS coder/encoder and DTMF autodial.
• Channel spacing: 12.5/20/25Khz; PLL channel step: 2.5, 3.125Khz (VHF); 5, 6.25Khz (UHF)
• 2-step power save
• Low battery alert
• Time-out-timer (TOT): The time-out timer limits continuous transmission time period to prevent accidental prolonged transmission.
• The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
• The built-in bridge-tied load (BTL) amplifier offers powerful 1500mW* audio output from the large 36mm speaker. The radio delivers loud and intelligible audio even in noisy environments.

• Surveillance mode (turn off LED and beep)
• Confirms with IP67 standard (waterproof and dust-tight)
• Equivalent to MIL-STD 810 C, D, E, F and G requirements
• Electronic serial number

Related media

Standard Accessories

Icom BP-279 Li-ion Battery


Gross price (including 27% VAT): 50.67€ (Net price: 39.89€)
The product is on stock. (1-4 pcs)

Icom BC-213 Desktop Charger


Gross price (including 27% VAT): 37.30€ (Net price: 29.37€)
The product is on stock. (5-9 pcs)

Icom FA-SC55V Antenna


Gross price (including 27% VAT): 10.91€ (Net price: 8.59€)
The product is on stock. (10+ pcs)

Icom MB-133 Belt Clip


Gross price (including 27% VAT): 9.85€ (Net price: 7.76€)
The product is on stock. (10+ pcs)

RELATED PRODUCTS

Icom BP-279 Li-ion Battery


Gross price (including 27% VAT): 50.67€ (Net price: 39.89€)
The product is on stock. (1-4 pcs)

Icom BP-280 Li-ion Battery


Gross price (including 27% VAT): 62.98€ (Net price: 49.59€)
The product is on stock. (1-4 pcs)

RELATED PRODUCTS (discontinued product)

JDI JD-130XEH5/IC-F3032/T/C Headset For Icom Radio (discontinued)


This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

Midland MA-NC 2 Headset (discontinued)


This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.