YShield PSA Pressure sensitive adhesive 5 liter

Further details of YShield PSA Pressure sensitive adhesive 5 liter

YSHIELD PSA can be applied like a wall paint with a paint roller. The thicker the layer, the stronger the adhesive strength. With wet bonding, work quickly and on small areas, then corrections can still be made.

With dry bonding, you have an immediate, very strong adhesion that can no longer be removed. It is best to work with a squeegee (e.g. our FVR10), which allows materials to be applied evenly and smoothly to the wet or dry adhesive layer.

Our SAFEBUILD products with an aluminum layer are difficult to bond on the aluminum side, typical wallpaper pastes do not adhere here. YSHIELD PSA has no problems here due to the combination of tack and permanent tack.

Due to the high tack (initial tack), the materials adhere very well even when the adhesive is still wet. If edges or corners become detached during drying, they can simply be pressed back on with the squeegee due to the permanent tack.

Never wash out the paint roller, wrap airtight in plastic film for storage, allow to dry and dispose of at the end of the job.

Ingredients

Acrylics dispersion, additives, preservative agent. Contains BIT (1,2-Benzisothiazolin-3-on) and INN (Zink-Pyrithion) for preservation.

Storage

Store in a cool, frost-free place out of the reach of children.

Disposal

Only dispose of empty containers for recycling. Dispose of dried material residues as household waste. Never allow the liquid or dry product to enter the sewage system, otherwise the pipes will clog immediately.