- Special Offers
- Transceiver Radio
- Transceiver Accessory
- Antennas
- Antenna Accessory
- Cable
- Connector
- Installation Material
- Installation Tools
- Measuring Equipement
- Body Worn Camera
- Electrosmog
- Telephone
- Baby Monitor
- Radio Device
- Set-top Boxes
- Personal Protective Equipment
- Motorcycle Helmet Speaker
- Car Equipment
- Voltage Converter
- Dry Cell
- Battery
- Battery Charger
- Emergency Signal
- Amber Signal
- Sound Signal
- Light and Sound Signal Accessory
- Traffic Engineering
- LED Lamp
- Smart Home
- Mosquito Repellent Device
- Market - Other Products
- Discontinued Products
True Heading CTRX Vision+ AIS Class B Transponder
Key features of True Heading CTRX Vision+ AIS Class B Transponder
• Class B-SOTDMA AIS transponder with 5 W transmit power
• AIS frequency range: 161.975-162.025 MHz
• Built-in VHF antenna splitter with 156-163 MHz operating range
• NMEA 0183, NMEA 2000, USB and WiFi data interfaces
• 72-channel GPS, GLONASS and SBAS GNSS receiver
• 12-24 V DC supply, current consumption below 220 mA at 12 V DC
• IP66 and IP67 waterproof ratings
• Dimensions: 173 x 128 x 53 mm, weight: 380 g
• The package includes the GPS/GNSS antenna with a 10-meter cable
Further details of True Heading CTRX Vision+ AIS Class B Transponder
The True Heading CTRX Vision+ is a 5 W Class B-SOTDMA AIS transponder with a built-in antenna splitter and an available WiFi option. Using the SOTDMA protocol, the unit participates in the AIS time-slot reservation plan and reserves a time slot for transmitting position data.
True Heading CTRX Vision+ SOTDMA AIS transponder
During SOTDMA operation, the CTRX Vision+ participates in the time-slot reservation process in the same way as AIS Class A equipment. It transmits position data at a higher update rate.
Previous CSTDMA transponders first check whether a free time slot is available. If no free time slot is available, a transmission may be skipped. The SOTDMA protocol of the CTRX Vision+ uses time-slot reservation.
CTRX Vision+ built-in VHF antenna splitter
The built-in antenna splitter allows the VHF antenna to be shared between the AIS transponder and the VHF radio. The receive insertion loss of the RF interface is 0 dB, while the transmit insertion loss is less than 1 dB.
• VHF antenna splitter operating frequency range: 156-163 MHz
• VHF port power handling: 25 W
• VHF antenna output: SO-239 connector
• VHF radio input: SO-239 connector
• GNSS antenna connector: TNC
The built-in antenna splitter allows the unit to use the VHF radio antenna, eliminating the need to position a separate AIS antenna.
True Heading CTRX Vision+ data connections
The transponder can be connected to a plotter or tablet using an electronic chart through several data interfaces.
• USB data interface
• NMEA 0183 output: 38,400 baud, IEC 61162-1
• NMEA 0183 input: 4,800 baud, IEC 61162-1
• NMEA 2000 interface
• WiFi connection
• Silent Mode switch input
• NMEA 2000 standard Micro connector
• 12-way power, NMEA 0183, USB and Silent Mode connector
The WiFi option is available for the CTRX Vision+.
CTRX Vision+ VHF transceiver specifications
• AIS operating frequency range: 161.975-162.025 MHz
• Number of transmitters: 1
• Transmit power: 5 W
• Access protocol: SOTDMA
• Number of receivers: 2
• Receiver sensitivity: less than -110 dBm at 20 percent PER
The unit transmits and receives AIS data within the specified frequency range as an AIS Class B-SOTDMA transponder.
CTRX Vision+ GNSS receiver
• Number of GNSS receiver channels: 72
• Supported systems: GPS, GLONASS and SBAS
• GNSS antenna connector: TNC
The internal GNSS receiver supports GPS, GLONASS and SBAS systems.
True Heading CTRX Vision+ user interface
The unit uses LED indicators to display its operating states.
• Power status indication
• TX timeout indication
• Error indication
• Silent Mode status indication
The Silent Mode switch input and its corresponding LED indication are part of the connection and user interface of the unit.
CTRX Vision+ power supply and physical data
• Supply voltage: 12-24 V DC
• Current consumption: less than 220 mA at 12 V DC
• Dimensions: 173 x 128 x 53 mm
• Weight: 380 g, AIS transponder unit only
The CTRX Vision+ is a small and lightweight AIS transponder.
True Heading CTRX Vision+ environmental specifications
• Waterproof rating: IP66 and IP67
• Environmental category: IEC 60945 Exposed Category
• Operating temperature: -25 C to +55 C
• Environmental standard: IEC 60945 Edition 4
The unit has IP66 and IP67 ratings and an environmental design that complies with the IEC 60945 Exposed Category requirements.
CTRX Vision+ standards compliance
AIS standards
• IEC 62287-1 Ed3
• IEC 62287-2 Ed2
• ITU-R M.1371-5
The listed standards define the compliance requirements for AIS operation.
GNSS performance standards
• IEC 61108-1 Ed 2.0
• IEC 61108-2 Ed 1.0
The GNSS receiver complies with the listed IEC performance standards.
Serial data interface standards
• IEC 61162-1 Ed 5.0
• IEC 61162-2 Ed 1.0
The serial data connections comply with the listed editions of the IEC 61162 standards.
Additional interface and safety standards
• NMEA 2000 Edition 3.101
• WiFi: FCC U30-G2M5477
• Product safety: EN 60950-1 2006, A11:2009, A1:2010, A12:2011 and A2:2013
The True Heading CTRX Vision+ is a 5 W Class B AIS transponder using the SOTDMA protocol. It features a built-in VHF antenna splitter, a 72-channel GNSS receiver, NMEA 0183, NMEA 2000, USB and WiFi data connections, and IP66 and IP67 environmental ratings.
