Icom IC-F3102D VHF Two-Way Handheld Radio (discontinued)

ICOM-596-999
Icom IC-F3102D VHF Two-Way Handheld Radio

Key features of Icom IC-F3102D VHF Two-Way Handheld Radio

• Frequency coverage: 136-174MHz
• 16 programmable channels
• Powerful 800mW audio output
• Internal VOX capability (optional OPC-2004 audio cable is needed)
• Lone worker function
• Reduced consumption current , longer operating time
• Integrated IDAS digital system (NXDN or dPMR)
• Built-in SEL 2/5, CTCSS, DTCS coder and encoder, DTMF autodial
• Maximum 5W RF output power
• Equivalent to MIL-STD 810 C, D, E, and F requirements
• Li-ion battery and rapid charger supplied as standard

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

Further details of Icom IC-F3102D VHF Two-Way Handheld Radio

• A new high efficiency FET of the IC-F3102D / IC-F4102D series reduces consumption current and provides 17,5 hours* of operating time with the BP-265, 2000mAh Li-ion battery pack. (Tx: 5%; Rx:5%; Stand by:90%)
• The battery connectors are made with anti-corrosion metal surface which is surrounded with a rubberized layer.
• The IC-F3102D/F4102D series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action, even while wearing gloves. This simple interface makes it ideal for high turnover environments and shift work where the radio is constantly passed from person to person. Additional 2 programmable function buttons are on the side of the radio. The LED lamp provides feedback for the user about the operation. (starting transmission, channel selection, etc.)
• Channel announcement when you rotate the channel knob. The IC-F3102D/F4102D series announces the channel number in English, which is ideal for workers in dark environments.
• The following features and settings are available with out any preprogramming: microphone gain, squelch level, beep level, ringer level.
• When the Lone Worker function is turned ON, and no operation is performed for the specified time period*, the transceiver enters the emergency mode, and then the countdown for the emergency call transmission starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly*. (*Depending on the presetting.)
• Limited MDC 1200 features and compatibility. (Analogue mode)
• Maximum 16 channels can be programmed into radio.
• The 5-Tone signalling (encoder/decoder) gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio. (Analogue mode)
• Built-in SEL 2/5, CTCSS, DTCS coder/encoder and DTMF autodial. (Analogue mode)
• Channel spacing: 12.5/20/25Khz; PLL channel step: 2.5, 3.125Khz (VHF); 5, 6.25Khz (UHF)
• 2-step power save
• Low battery alert
• Time-out-timer (TOT): The time-out timer limits continuous transmission time period to prevent accidental prolonged transmission.
• The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
• The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
• Internal VOX for hands-free operation (optional OPC-2004 audio cable and VOX compatible headset are needed)
• Confirms with IP54 standard (dust-protection and water resistant)
• Equivalent to MIL-STD 810 C, D, E, and F requirements
• Electronic serial number
• When used with new HM-171GP GPS speaker-microphone, the IC-F3102D/F4102D series can send own GPS position data with voice or emergency signal.
• IDAS™ digital mode operation. The following IDAS features are programmable: PTT ID (TX); Individual/Group call (TX); Block decode; RAN (Radio Access Number); Radio check (RX); Stun/kill/revive (RX); Call alert (RX); Remote monitor (RX); Emergency (TX); Digital voice scrambler; GPS (TX only with HM-171GP) [TX: Transmit, RX: Receive]

Standard Accessories of Icom IC-F3102D VHF Two-Way Handheld Radio

Icom BC-193 Complete Desktop Charger (discontinued)


This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

Icom IC-F3102D VHF Two-Way Handheld Radio related products

Icom Headset and Audio Accessory

Icom Programming Software And Cable

Icom Battery and Battery Case

Icom Battery Charger, Adapter, Power Supply

Icom Antenna and Antenna Accessory

Icom Carrying Case and Belt Clip

Headset for Icom, Alan, Albrecht and Midland Radios from other Brands

Icom Hand Microphone

Hand Microphone for Icom and Albrecht Radios from other Manufacturers

Icom IC-F3102D VHF Two-Way Handheld Radio related discontinued products

Discontinued Icom Products

Discontinued JDI Products

Discontinued Midland Products

Discontinued Power-Time Products

Discontinued Jean Couk Products

Discontinued Voxtech Products