Motorola MotoTRBO DP4400E VHF Two-Way Handheld Transceiver Radio (discontinued)

Further details of Motorola MotoTRBO DP4400E VHF Two-Way Handheld Transceiver Radio

• The operating time reaches up to 9 hours in analogue mode and 10 hours in digital with the supplied PMNN4412 1400mAh NiMH battery. (Tx: 5%; Rx:5%; Stand by:90%)
• The DP4000 series radio meets IP68 dust-tight protection and water resistant standard (immersion at least 1 m for 30 minutes) and MIL-STD 810 C, D, E, F and G requirements
• Easy to use due to the three main control buttons only. Large, textured push-to-talk button, chunky rotary channel and volume knobs.
• The tricolour LED lamp provides feedback for the user about the operation. (starting transmission, channel selection, etc.)
• Additional 3 programmable function buttons can be set to give immediate access to the most often used features making communication even simplier.
• Maximum 32 channels can be programmed in the radio.
• Simple, quick call modes: individual, group and all call
• Sophisticated Emergency Calls help ensure employee safety
• PTT ID helps improve communications efficiency and system discipline
• Remote monitor features help ensure employee safety and enable fast assessment of remote user status
• Privacy features. The radio can be programmed to require password prior to read out of the program
• User defined or automatic analogue / digital mode
• Elegant channel scanning schemes help ensure calls are received first time every time
• Integrated VOX function for hands-free operation which can be set by predefined programmable button
• Transmit interrupt
• When the Lone Worker function is turned ON, and no operation is performed for the specified time period*, the transceiver enters the emergency mode, and then the countdown for the emergency call transmission starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly*. (*Depending on the presetting.)
• Option board capability
• Adjustable RF output power (1 / 5 W)
• Intelligent Audio allowing the radio volume to automatically adjust to compensate for background noise.
• Main features of analogue mode: CTCSS, SEL5, Time out timer (TOT), PL/DPL squelch, channel monitoring, channel spacing: 12.5/25Khz
• Automatic energy saver
• 500mW audio output power
• Electronic serial number
• RF port and IP connection via accessory connector with USB cable
• Enhanced data transmission capability
• IP Site Connect, Capacity Plus (Single Site Trunking) and Linked Capacity Plus (Multi Site Trunking) features
• Can be integrated into digital telephony system