Fracarro SCD2-5416W Cascadable SCD2 Multiswitch

Further details of Fracarro SCD2-5416W Cascadable SCD2 Multiswitch

• Consumption (13V): 85 mA on the DC-IN or VL input / 400 mA on the HL or VH taps
• Supply voltage: Between 12 and 18 V
• Absorption: 600 mA on the DC-IN or VL input (13V)/ power is passed through the HL, VH, or HH taps
• Operating temperature: between -10 and 55 degrees Celsius
• SAT automatic gain: 55–90 dBµV
• SAT insertion loss: -2.5 dB
• SAT return loss: greater than 10 dB
• TV gain: -14 (passive)
• TV insertion loss: -3.5 dB
• Weight: 0.492 kg
• Series with 4 satellite inputs and 1 TV input, 5 pass-through outputs and 2, 4, 6 or 8 user extensions, 4 SCR tuners and 12 dCSS SCD2 tuners simultaneously for each output.
• Compatible with both conventional LNB (UX-QT LTE) and Wideband LNB (UX-WB LTE) to distribute the 4 polarities of a satellite with only two cables.
• Passive TV input to mix DTT and Satellite signals in distribution.
• Automatic Gain Control (AGC): maintains an adequate output signal (85dBµV) even when input signal strength varies.
• Autodetection of the operating mode depending on the STB connected to the port; this allows switching from a Legacy STB to an SCR or SCD2 without any intervention on the system. The multiswitch automatically starts in Legacy mode and switches to SCR or SCD2 mode as soon as it detects a DiSEqC command.
• Low handover loss
• DC pass-through on all satellite ports for maximum compatibility with existing installations.
• FVM (Flexible Voltage Management) allows the multiswitch to be powered in different modes without the need for a dip switch.
• Universal standard: compatible both with SCR/SCD and SCD2 frequencies and with dSCR standard.
• The power supply unit (PSU1430F) is not included: it would be needed if the receiver cannot handle the load.