Albrecht DMR-100 DMR and PMR Handheld Two-Way Radio

Further details of Albrecht DMR-100 DMR and PMR Handheld Two-Way Radio

The Albrecht DMR-100 handheld radio supports both digital DMR Tier 1 and analogue PMR446 radio communication. The two operating modes can be selected using the side button on the radio. Digital operation provides noise-free audio transmission and improved audio quality.

Albrecht DMR-100 digital and analogue handheld radio

• Dual mode: digital DMR Tier 1 and analogue PMR446 radio communication
• DMR Tier 1 operation with Mototrbo standard
• Fast switching between digital and analogue modes
• Digital mode: Zone 1
• Analogue mode: Zone 2
• 32 channels: 16 digital DMR446 and 16 analogue PMR446 channels
• Frequency range: 446.00625-446.19375 MHz
• Transmission power: 500 mW ERP
• Range: up to 10 km

The radio combines digital and analogue channel operation in a single handheld unit. The channel selector allows selection from 16 channels within the active zone.

DMR-100 controls and operation

• Fixed antenna
• PTT transmission button
• Short press of the upper side button: switch between Zone 1 and Zone 2
• Long press of the upper side button: activate or deactivate the VOX function
• Short press of the lower side button: start channel scanning
• Long press of the lower side button: activate the emergency alarm
• Left rotary control: channel selection
• Right rotary control: power on, power off and volume adjustment
• LED status indicator: green during reception and red during transmission
• Integrated loudspeaker and microphone
• English voice announcements for functions and the active channel

During transmission, the PTT button must be held down while speaking directly into the microphone. Releasing the button clears the channel for receiving replies.

VOX, channel scanning and emergency alarm

• VOX hands-free transmission
• Automatic transmission when the microphone detects a sufficient sound level
• Automatic return to reception mode after speaking has stopped
• Channel scan for detecting active signals
• 3-second reply period after the detected signal ends
• Automatic continuation of the scan after the reply period
• Emergency alarm siren
• Emergency alarm can be stopped using the PTT button
• Power saving mode

The VOX function allows the radio to begin transmitting automatically when sound is detected by the microphone. The channel scan checks all available channels for active signals.

Albrecht DMR-100 battery and charging

• Li-Ion battery
• Nominal voltage: 3.7 V
• Capacity: 1500 mAh
• Energy: 5.55 Wh
• Operating time: up to 23 hours
• USB-C charging socket on the radio
• Red status indication during charging
• Green status indication when charging is complete
• Flashing red status indicator when the battery level is low

The battery can be charged directly through the USB-C socket on the radio or with the included desktop charger. The desktop charger is connected using the USB-C cable and the included power supply.

DMR-100 computer programming

• Programming of digital voice encryption
• Programming of private IDs and group IDs
• Configuration of private or group communication
• CTCSS and DCS configuration for analogue channels
• Separately available programming cable required
• Programming cable item number: 29821
• Programming cable for radios with a Kenwood connection

Additional digital and analogue functions can be programmed using the computer software. Programming requires the separately available cable with item number 29821.

Connections and physical specifications

• External headset connection
• Kenwood pin assignment
• Dimensions: 34 x 57 x 203 mm
• Weight: 165 g

The radio can also be used with an external headset. The headset socket uses a Kenwood pin assignment.

Albrecht DMR-100 package contents

• Albrecht DMR-100 handheld radio
• Desktop charger
• USB-C power supply
• 1500 mAh battery
• Wrist strap
• Manual

The Albrecht DMR-100 provides 16 digital DMR446 and 16 analogue PMR446 channels in one radio. The included battery can be charged through USB-C or with the desktop charger, while the separately available programming cable enables additional digital and analogue settings to be programmed.