Discontinued Products 3M Peltor

• Portable unit for use in a DECT-Com II conference with up to 9 simultaneous speakers in full duplex.
• The DECT-Com II conference can also have an additional number of listeners, all with possibility to enter as speakers in the conference, at any time
• Headsets with different types of microphones can be used
• Full duplex communication, but with “VOX”, for preventing from transmitting background noise to the conference.
• An “all call” function makes it possible to communicate common messages (simplex) to all users in all groups, at the same time
• The portable unit is normally power supplied with rechargeable battery pack. (Can also be used fixed installed, power supplied in a special holder with AC adapter.)

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Portable unit for use in a DECT-Com II conference with up to 9 simultaneous speakers in full duplex.
• The DECT-Com II conference can also have an additional number of listeners, all with possibility to enter as speakers in the conference, at any time
• Two more separate conference groups on this same base. (Requires software programming.)
• Depending on start up sequence this unit can be used as either base or portable
• Headsets with different types of microphones can be used. A headset can be connected also when this unit is used as a base.
• Full duplex communication, but with “VOX”, for preventing from transmitting background noise to the conference.
• An “all call” function makes it possible to communicate common messages (simplex) to all users in all groups, at the same time
• As a fixed installed base, the unit is normally power supplied in a special holder with AC adapter, but the unit can also be used portable with rechargeable battery pack.

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• For charging and holding the DC2811 and DC2812 units
• Meet the requirements of IP42 water and dust protection
• 9-12Vdc
• Includes mains adapter DC2061

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• 3M Peltor Vehicle intercom is an intercom system based on Peltor’s’ rally amplifiers
• The system is designed for use in vehicles on land and sea, combining full-duplex communication with connectability to a mobile station/com radio(s)
• The vehicle intercom system is fitted in a moisture and impact-resistant metal capsule
• Cables for power, headsets, PTT function and mobile stations can be connected to the unit
• For wiring information please contact Technical Communication Service, Sweden
• Maximum number of users: 8
• External powersource: 12Vdc

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Low-profile shells for easy and comfortable use together with other PPE devices
• Low weight
• Soft, wide, foam and fluid filled ear cushions and individually sprung headband wires of stainless steel provide an even and consistent distribution of pressure around the ears for the best possible comfort
• Beam-mounted earphones that provide the least possible resonance and distortion for excellent sound reproduction even in high-noise environments
• Available with neck or headband
• 3.5 mm stereo connector

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Available in mono, or in stereo with a volume level limiter equivalent to 82 dB(A) sound level
• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort
• Soft, wide, foam and fluid filled ear cushions and individually sprung headband wires of stainless steel provide an even and consistent distribution of pressure around the ears for the best possible comfort
• Beam-mounted earphones that provide the least possible resonance and distortion for excellent sound reproduction even in very high-noise environments
• Numerous configurations. Overhead, neckband and helmet-attached versions to meet most users’ requirements. Also available with a number of different connectors

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort
• Soft, wide, foam and fluid-filled ear cushions and individually sprung headband wires of stainless sprung steel provide an even and consistent distribution of pressure around the ears for the best possible comfort
• Beam-mounted earphones that provide the least possible resonance and distortion for excellent sound reproduction even in very high-noise environments
• Ex Class: EX II 2G Ex ib IIC T4

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• OraTac is a dual sided in-ear headset
• Provides clear communication with level dependent function (similar to situational awareness) when attached to your 2 way radio
• Helps provide protection from high-noise in a variety of environments and helps provide protection from impulse noises when they occur
• The OraTac system is comprised of an in-ear headset with PTT adapter and a quick disconnect cable
• The cable connects to individual radios and can be switched when a new radio is purchased
• Connection cable can be ordered for Motorola, Icom, Kenwood, Sepura, Vertex and GSM

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Very high comfort due to a broad headband of sprung stainless steel, which ensures even head contact pressure
• Replaceable padding
• Built-in air ducts
• Continuous height adjustment
• Load-relieving cord clip
• Standard version with J11 connector
• Single sided earphones
• Not CE approved as hearing protection device

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Very high comfort due to a broad headband of sprung stainless steel, which ensures even head contact pressure
• Replaceable padding
• Built-in air ducts
• Continuous height adjustment
• Load-relieving cord clip
• Standard version with J11 connector
• Dual sided earphones
• Not CE approved as hearing protection device

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Low-profile shells for easy, comfortable use together with other PPE devices
• Low weight
• Dynamic speech microphone with effective noise compensation for clear and reliable communication
• Quick positioning microphone for easy handling
• Soft, wide, foam and fluid filled ear cushions and individually sprung headband wires of stainless steel provide an even and consistent distribution of pressure around the ears for the best possible comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort
• Microphone with effective noise compensation for clear and reliable communication
• Quick positioning integrated microphone boom for easy handling
• Soft, wide, foam and fluid filled ear cushions and individually sprung headband wires of stainless steel provide an even and consistent distribution of pressure around the ears for the best possible comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Wireless connection to phones or communication radios using Bluetooth™ technology
• The headset and telephone can be up to 10 metres apart and out of visible range without losing contact
• Volume and answer button on the shell
• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• ATEX approved according to: Ex I M1 Ex ia I; Ex II 2G Ex ia IIC T4; Ex II 2D Ex ia D21 T130c
• Wireless connection to phones or communication radios using Bluetooth™ technology
• The headset and telephone can be up to 10 metres apart and out of visible range without losing contact
• Volume and answer button on the shell
• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Extra high-attenuating twin shells with optimised acoustic design and excellent space for the ears for best possible sound quality and comfort
• Microphone with efficient noise compensation for clear and reliable communication
• Quick Positioning integrated microphone boom for easy handling
• Soft, wide foam and fluid-filled sealing rings and individually sprung headband wires of stainless sprung steel provide an even and consistent distribution of pressure around the ears for best possible comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• EX-approved headsets according to ATEX class Ex II 2 G Ex ib IIC T4
• High-attenuating Twin Cup shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort
• Microphone with effective noise compensation for clear and reliable communication
• Integrated microphone boom with Quick Positioning for easy handling
• Soft, wide, foam and fluid-filled ear cushions and individually sprung headband wires of stainless sprung steel provide an even and consistent distribution of pressure around the ears for the best possible comfort
• Standard J11 connection (Nexus TP-120)
• Earphones that provide the least possible resonance and distortion for excellent sound reproduction even in very high-noise environments

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Wireless connection to WS Ground Mechanic adapter using Bluetooth™ technology.
• The headset and adapter can be up to 10 metres apart and out of visible range without losing contact.
• Volume and PTT button on the shell
• High-attenuating shells with optimised acoustic design and excellent space for the ears for the best possible sound quality and comfort

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The 3M PELTOR Optime Push To Listen (PTL) Ear Muffs are fitted with a simple sound reproduction facility to enable better speech intelligibility when used in a noisy background
• By simply pressing a button located on the outside of the cup, the product allows you to listen to important speech conversation against a noisy background
• This feature helps facilitate the need for communication without having to remove the ear muffs from the ears
• The electronic sound reproduction function is built into one cup only.
• Simply push the button to listen, opening up the ear muffs for communication.
• Weight: 290 g
• Attenuation rating (SNR): 31dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The 3M PELTOR ProTac II level dependant hearing potector improves safety for users in noisy environments. You can hear your surroundings and communicate with your colleagues without taking the hearing protector off.
• Safeguards your ears from harmful noise, while heightening your senses and ability to react.
• Level dependent function that lets you hear ambient sound: conversation, machine sounds and warning signal
• Last setting is stored when switched off
• Automatic shut-off after two hours if no function is used
• Weight: 355 g
• Attenuation rating (SNR): 32dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Slim cup design.
• Level dependent function for ambient listening
• Last setting is stored when switched off
• Totally independent dual earphone system for level dependent and external radios signal, for maximum security.
• Automatically switches off after two hours if no function is used
• Two signals are emitted as a warning that the ComTac will switch off in one minute if no function is activated.
• Battery life is about 250 hours. Three warning signals are emitted every 30 seconds for five minutes when power is low, then the headset switches off
• Attenuation rating (SNR): 25dB
• The picture and the price refer to MT15H69FB-02 378 type.

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The ComTac™ XP head protector meets the toughest military demands for durability and function. The headset is also equipped with the world’s most advanced tactical function, with features such as an equalizer, so the user can concentrate fully on the task at hand
• Thin, high-attenuating shell (SNR 28)
• Tested to IP 68 and military specifications
• Watertight microphones
• Weight: 295g
• Attenuation rating (SNR): 28dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The ComTac™ XP head protector meets the toughest military demands for durability and function. The headset is also equipped with the world’s most advanced tactical function, with features such as an equalizer, so the user can concentrate fully on the task at hand
• Thin, high-attenuating shell (SNR 28)
• Tested to IP 68 and military specifications
• Watertight microphones
• Weight: 295g
• Attenuation rating (SNR): 28dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The Peltor Tactical XP protects you from harmful noise and impulse sounds, while alowing and even amplifying ambient sounds such as conversation, barking of dogs and warning signals.
• The built-in functions of the Tactical XP make it quite different from other active hearing protectors: The user can control and vary the volume function for the current situation.
• Where necessary, ambient noise can be amplified more than any other Peltor hearing protector allows.
• Level dependent function that lets you hear ambient sound: conversation, machine sounds and warning signals
• Electronic voice guided menu system
• Equipped the following functions: volume for the level dependent function, balance, adjustable release time, equalizer, volume for external input and external input mode
• Large space helps reduce heat build-up
• Last setting is stored when switched off
• Attenuation rating (SNR): 31dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The Peltor Tactical XP protects you from harmful noise and impulse sounds, while allowing and even amplifying ambient sounds such as conversation, machine noises and warning signals.
• The built-in functions of the Tactical XP make it quite different from other active hearing protectors: the user can control and vary the volume function for the current situation
• When necessary, ambient noise can be amplified more than any other Peltor hearing protector allows.
• Peltor Tactical XP lets you hear what you want to hear and blocks out all harmful noise.
• Each function and setting is indicated by a voice message
• Peltor Tactical XP is also availabele without boom microphone
• Attenuation rating (SNR): 30dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• 3M Peltor FMT120 intercom provides a full duplex connection with extremely high sound quality.
• The audio output (AUX) enables sound recording of the communication between driver and co-driver
• An attenuation switch to change the driver’s microphone sensitivity, which is set 10 dB lower than the co-driver’s as standard
• Separate volume controls for driver and co-driver

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The Peltor FMT200 Rally Intercom is the result of over 20 years’ experience in rally competition and close collaboration with several world-leading rally teams.
• It was designed to minimise interfering noise from other electronics in the car and maximise audibility and communication ability in the extreme environment of a rally car
• The Peltor FMT200 can also be connected to a communication radio, GSM telephone or an audio output signal for video.
• Easy to manoeuvre through touch controls; LEDs provide information about setting

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• First-class stereo motorcycle intercom with excellent sound quality
• You can connect an external sound system – radio, CD or tape deck
• The amplifier runs on the 12V power from the motorcycle’s electrical system
• The amplifier has adjustable voice control (VOX) and automatic muting of the radio when the driver and passenger talk
• Includes cables for connecting a GSM phone, GPS, MP3 player etc
• Product code: FMT160-01 - for full face helmets; FMT160-02 - for open face helmets

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The 3M PELTOR Rally Headset MT7H79A 78-VI is a comfortable and high attenuating rally headset for clear and reliable communication.
• Low weight, comfortable design
• Compatible with the FMT15 FMT110, FMT200 amplifiers and the FL5000 adapter
• Fast-adjusting, noise-cancelling microphone
• Can be connected to most communication radio systems via an adapter
• Weight: 315 g
• Attenuation rating (SNR): 33dB
• Available in helmet attachment option
• The picture and the price refer to MT7H79A 78-VI type.

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Easy to adapt to most helmets
• Ambient noise-compensated, fast-adjusting mike for optimal positioning (3–5 mm from the lips).
• The picture and the price refer to MT632 type for open face helmet

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The 3M PELTOR™ Racing Communication Plugs HTM042 are high quality in-ear speakers with noise attenuating plugs.
• High quality in-ear speakers with noise attenuating plugs
• Small size for comfortable use with Motorsport helmets
• CE-approved according to EN 352-2:2002 and EN 352-6:2002
• Plugs are replaceable for hygienic reasons

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• SNELL SA2010
• H.A.N.S ® post anchors
• FIA8858-2010
• Kevlar®/Carbon Fiber/Fiberglass composite
• Built in hearing protector cups
• Adjustable microphone boom

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Peltor LiteCom Pro II is a communication headset with high attenuation hearing protection and short range built-in communication radio. The communication radio is designed for either stand alone or integration into industrial or other professional communication systems.
• Has a built-in active-volume function that lets you hear ambient sound: conversation, machine sounds and warning signals
• Built-in VOX for handsfree operation
• Sudden impulse noises at harmful levels are immediately attenuated
• An electronic voice tells you what settings you are adjusting, so you do not have to take off the headset to check
• Ex class: I M1Ex ia I Ma; II 1GEx ia IIC T4 -20°C≤Ta≤+50°C Ga; II 1DEx ia IIIC T130°C Da

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Peltor LiteCom Pro II is a communication headset with high attenuation hearing protection and short range built-in communication radio. The communication radio is designed for either stand alone or integration into industrial or other professional communication systems.
• Has a built-in active-volume function that lets you hear ambient sound: conversation, machine sounds and warning signals
• Built-in VOX for handsfree operation
• Sudden impulse noises at harmful levels are immediately attenuated
• An electronic voice tells you what settings you are adjusting, so you do not have to take off the headset to check

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Communication on 8 channels in the PMR 446MHz band
• 38 sub-channels allow several users to communicate individually using the same channel
• An electronic voice tells wearers what settings are being adjusted - no need to take off the headset to check
• Up to 1 kilometre range
• Automatically switches off after two hours of non-use to save batteries
• An auxiliary input also lets you connect a cellular phone or external com radio, regardless of the frequency
• For safety reasons, the external system has signal priority
• You can also connect a CD player or FM radio and listen to news and music
• Attenuation (SNR): 31dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The Aviation 8003 headset for winged aircraft has an ambient-noise compensated dynamic differential microphone, specially designed for aviation intercom systems.
• The microphone amplifier can be adjusted for output signals in the range of 300-600 mV
• The frequency range is adjusted for good speech recognition
• The earphones have a broad frequency range for good sound reproduction

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

•The Aviation 8006 headset for winged aircraft has an ambient-noise compensated electret differential microphone, specially designed for aviation intercom systems
• The microphone amplifier can be adjusted for output signals in the range of 300-600 mV
• The frequency range is adjusted for good speech recognition
• The earphones have a broad frequency range for good sound reproduction

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

•The Aviation 8103 helicopter headset has an ambient-noise compensated dynamic differential microphone, specially designed for aviation intercom systems
• The microphone amplifier is designed for intercom systems with 5 Ohm impedance
• The frequency range is adjusted for good speech recognition
• The earphones have a limited frequency range, to give the best possible speech recognition in the ambient noise of a helicopter

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

•The Aviation 8106 helicopter headset has an ambient-noise compensated electret differential microphone
• The earphones have a limited frequency range, to ensure the best possible speech recognition in the ambient noise of a helicopter
• Peltor’s two-point suspension of the shells on a broad headband ensures total comfort and consistent noise attenuation
• The spiral polyurethane cable has a moulded NATO-standard connector equivalent to the Nexus TP-120

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• 3M Peltor Twin Cup Hummingbird Headset is designed for connection to low impedance helicopter intercom systems. It has leather covered headband and individually sprung headband wires of stainless steel to provide best comfort and durability.
• Highly attenuating headset for use in extremely noisy environments
• Microphone with efficient noise compensation for clear and reliable communication

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Digital FM-Radio Hearing Protectors with superior audio performance and super fast digital tuning.
• Easy to read LCD display for precise tuning
• Memory able to pre set up to 5 stations, so finding your favourite station is as easy as the push of a button
• Bass boost function
• A 3,5 mm stereo input jack makes it great for use with MP3 players
• Includes cord
• Battery lifetime: 200 hours
• Attenuation rating (SNR): 29dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• 3M™ PELTOR™ FM-radio can help improving safety and motivation for users in noisy conditions. If you want to protect your hearing and listen to the radio without outside interruption this is a good hearing protector for you
• Built in FM-radio receiver
• Extra wide, soft, padded head band distributes weight while two-point suspension exerts low pressure for comfortable, long-term use
• Battery lifetime approximately 140 hours
• A separate audio input enables connection with MP3 player or two way radio equipment
• Frequency tuning control
• On/Off & volume control
• Attenuation rating (SNR): 32dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Wireless connection via Bluetooth to DECT- or mobile phone
• Stream music / internet radio from MP3 player, mobile phone, computer etc.
• FM/AM radio receiver
• Level dependent function that ‘listens’ to your surroundings
• A short, flexible antenna provides excellent reception with no annoying interference, even in harsh conditions
• Switches automatically from stereo to mono for the best reception in the event of a weak signal
• Attenuation rating (SNR): 32dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• The 3M™ PELTOR™ HearPlug™ Communication Ear plugs with 3.5mm or 2.5mm mono plug
• SNR 33 dB if single-use EAR Ultrafit ear plugs are used,
• SNR 27 dB if reusable EAR Classic ear plugs are used
• Weight 21g
• One set of reusable communication ear plugs (PELTIP1-01) are included
• Replacement ear plugs PELTIP1-01 and PELTIP2-01 available

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Non attenuating light weight headset
• Single side speaker
• Noise compensated microphone
• J11 standard connection
• Compatible with Peltor FL50** series adapters and Dect Com

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• Wireless connection via Bluetooth to communication radio, DECT or mobilephone
• Level dependent function that lets you hear ambient sound: conversation, machine sounds and warning signals
• Electronic voice guided menu system
• Equipped with the following functions: volume for the level dependent function, balance, adjustable release time, equalizer, volume for external input
• Plenty of space for the ear
• Last setting is stored when switched off
• Automatic shut-off after two hours if no function is used
• Warning signal when power is low, before shut-off
• Weight: 400g
• Attenuation rating (SNR): 31dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.

• PeltorTM TacticalTM XP is an active-volume hearing protector, users can hear ambient noise: conversations, machine noises etc.
• Soft sounds are amplified, so you hear them even better than you would without hearing protectors. At the same time, sudden impulse noises at harmful levels are immediately attenuated.
• The PeltorTM TacticalTM XP uses a new, revolutionary digital circuit that lets the user control and monitor the active-volume function, adapting the qualities of the protector to the situation and environment
• The activevolume function on the PeltorTM TacticalTM XP also amplifies weak sounds better than any other Peltor protector.
• Weight: 460g
• Attenuation rating (SNR): 31dB

This product is not available.
Possible reasons that the product is not available from the manufacturer anymore or we decided to remove it from our product portfolio. We gladly help you to find the best optional product instead of this type, please contact us.