Blue and Red Perimeter Lights

- further categories

The blue and red auxiliary light signal does not in itself replace the primary stable light bridge or mobile light, as the name suggests, but only complements it. Today, we almost exclusively see LED designs. Auxiliary beacons are generally fixed, with the exception of windscreen indicators, which may be suction cup, self-adhesive or Velcro. Read more...

Change product view: Order products by:
Filter products
46 products in total, page 1: 1 - 25 / 4612

• 3 LEDs
• Dimensions: 6,4cm width x 3,6cm height x 3,2cm depth
• Includes rubber mounting gasket and mounting hardware with 12″ of 3-wire cable for hard wire installation
• 33 flash patterns
• 10-30Vdc input voltage
• Many versatile mounting options with optional brackets
• The picture and the price refers to the EL3SN30R article number

Gross price (including 27% VAT): 202.16€ (Net price: 159.18€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sits just 0.3 inches (0.8 cm) from the body of the vehicle when installed
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE5BB-EU article number

Gross price (including 27% VAT): 166.86€ (Net price: 131.39€)

• Approved LED blue flashing perimeter light dual lock velcro strip
• LED flashing blue emergency light with polycarbonate dome and ABS housing
• Supplied with integrated 6 pcs LED module
• Selectable flash patterns (cruise light available)
• Developed to use behind the windscreen, anti-glare protection
• Maximum current: 0.36A @ 12Vdc
• Dimensions: 49mm height, 150mm width, 130mm depth, 300g weight
• Flashing per minute: 130 FPM (+/- 10)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• The picture and the price refers to the 12/24Vdc version 72977 article number

Gross price (including 27% VAT): 292.65€ (Net price: 230.43€)

• Approved LED red flashing perimeter light dual lock velcro strip
• LED flashing red emergency light with polycarbonate dome and ABS housing
• Supplied with integrated 6 pcs LED module
• Selectable flash patterns (cruise light available)
• Developed to use behind the windscreen, anti-glare protection
• Maximum current: 0.36A @ 12Vdc
• Dimensions: 49mm height, 150mm width, 130mm depth, 300g weight
• Flashing per minute: 130 FPM (+/- 10)
• Confirms with IP55 standard
• ECE R65 and EMC certifications
• This product works with both 12Vdc and 24Vdc power source
• The picture and the price refers to the 12/24Vdc version 72989 article number

Gross price (including 27% VAT): 292.65€ (Net price: 230.43€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sleek, narrow surface mount light, fits almost anywhere
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE2RB-EU article number

Gross price (including 27% VAT): 132.20€ (Net price: 104.10€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sleek, narrow surface mount light, fits almost anywhere
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE2BB-EU article number

Gross price (including 27% VAT): 166.86€ (Net price: 131.39€)

• 6 pcs high intensity LED
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 12,27cm length x 3,6cm height x 3,6cm depth
• 12 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENDSWS1B article number

Gross price (including 27% VAT): 223.34€ (Net price: 175.86€)

• 6 pcs high intensity LED on both sides
• Single color version, full blue and full red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS1RB article number

Gross price (including 27% VAT): 426.14€ (Net price: 335.54€)

• 6 pcs high intensity LED on both sides
• Split color version, half blue and half red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS1JJ article number

Gross price (including 27% VAT): 426.14€ (Net price: 335.54€)

• 12 pcs high intensity LED on both sides
• Single color version, full blue and full red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS3RB article number

Gross price (including 27% VAT): 486.78€ (Net price: 383.29€)

• Fusion II Technology - optic for a bright, extra wide output
• Dimensions: 8cm width x 2cm height x 4,2cm depth
• Light can be surface mounted to any flat area on any type of vehicle
• 6 flash patterns
• Non-volatile memory - recalls last flash pattern used
• 10-30Vdc input voltage
• 15cm of wire cable for installation
• Light sync: 6 units can be synchronised
• Weatherproof black metal housing
• The picture and the price refers to the EFL1B0B article number

Gross price (including 27% VAT): 67.39€ (Net price: 53.06€)

• Fusion II Technology - optic for a bright, extra wide output
• Dimensions: 8cm width x 2cm height x 4,2cm depth
• Light can be surface mounted to any flat area on any type of vehicle
• 6 flash patterns
• Non-volatile memory - recalls last flash pattern used
• 10-30Vdc input voltage
• 15cm of wire cable for installation
• Light sync: 6 units can be synchronised
• Weatherproof black metal housing
• The picture and the price refers to the EFL1B0R article number

Gross price (including 27% VAT): 67.39€ (Net price: 53.06€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 7,72cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS1SLE3B article number

Gross price (including 27% VAT): 161.73€ (Net price: 127.34€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS2STE3B article number

Gross price (including 27% VAT): 171.03€ (Net price: 134.67€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS2STE3R article number

Gross price (including 27% VAT): 171.03€ (Net price: 134.67€)

• 1 pair, 12 leds/light, 3W/led, red colour
• New, larger version
• Low power consumption
• Easy to install
• Very good light effect
• Approval E20 R10, E9 R65
• Voltage: 10-30V
• Dimensions: 100x65x26mm

Gross price (including 27% VAT): 147.29€ (Net price: 115.97€)

• 1 pair, 12 leds/lights, 3W/led, blue colour
• New, larger version
• Low power consumption
• Easy to install
• Very good light effect
• Approval E20 R10, E9 R65
• Voltage: 10-30V
• Dimensions: 100x65x26mm

Gross price (including 27% VAT): 147.29€ (Net price: 115.97€)

• 1 pair, 6 leds/lights, 3W/led, red color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 10-30V
• Dimensions: 100x37x26mm

Gross price (including 27% VAT): 94.34€ (Net price: 74.28€)

• 1 pair, 6 leds/lights, 3W/led, blue color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 10-30V
• Dimensions: 100x37x26mm

Gross price (including 27% VAT): 94.34€ (Net price: 74.28€)

• 1 pair, 6 leds/lights, 3W/led, amber/blue color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 10-30V
• Dimensions: 100x37x26mm

Gross price (including 27% VAT): 103.65€ (Net price: 81.61€)

• 1 pair, 6 leds/lights, 3W/led, blue color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 12/24V
• Dimensions: 91x28x8mm

Gross price (including 27% VAT): 94.34€ (Net price: 74.28€)

• 1 pair, 6 leds/lights, 3W/led, blue color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 12/24V
• Dimensions: 130x25x18mm

Gross price (including 27% VAT): 150.82€ (Net price: 118.75€)

• 1 pair, 6 leds/lights, 3W/led, amber/blue color
• Easy to install
• Low power consumption
• Approval E20 R10, E9 R65
• Voltage: 12/24V
• Dimensions: 130x25x18mm

Gross price (including 27% VAT): 169.75€ (Net price: 133.66€)

• 4 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 7,72cm width x 2,3cm height x 1cm depth
• Stud mount
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS1STS1R article number

Gross price (including 27% VAT): 137.66€ (Net price: 108.39€)

• 6 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS2STS2B article number

Gross price (including 27% VAT): 191.89€ (Net price: 151.09€)
46 products in total, page 1: 1 - 25 / 4612

The Hungarian standard stipulates that the blue supplementary light signal may only be used in conjunction with the primary signal. When installing it, the regulations and the rules for its operation must be taken into account. The purpose of using these supplementary blue and red indicators is to increase the visibility of the vehicle using the distinctive sign.

Types of Blue and Red Perimeter Lights

Blue and red auxiliary lights can be used for 12-24V DC systems, depending on the type of vehicle. The auxiliary flasher is also available in red, yellow or white, which provides better visibility in certain conditions. The blue auxiliary light signals require compliance with the R65 and R10 standards for placing on the market, which covers colour co-ordination and electromagnetic compatibility. The latter ensures that the device is adapted to and does not interfere with the vehicle's electrical system. Typical applications for blue and red auxiliary light signals include trucks, special bodies and large vehicles.

Multicolor LED light bridges are now available, which means that 2 to 3 or 4 colors can be displayed within the light body. This design allows the vehicle using the distinctive markings to give a warning signal where appropriate or possibly provide area illumination by switching on the white light. The pattern of the supplementary flasher often includes pre-programmed timings that can be selected by the user or installer, taking into account the country's regulations.

How to install the blue Perimeter Lights

Manufacturers use different headlight lenses and mirrors to increase the light output, and offer different mounting methods (screw, bonded or auxiliary bracket mounting), but in most cases, car-specific mounting brackets are required. To control more than two lamps together, synchronisation options are provided with the possibility to set different flashing effects. They can even be integrated into the vehicle's headlamp housing, so you can use these additional flashing devices inconspicuously without anyone noticing that it is an indiscriminate, i.e. covered, vehicle.

Considering the customer's needs, there are many ways to install the auxiliary flasher, such as: behind the grille, behind the windscreen (also known as windscreen flasher), behind the rear and side windows, on the rear-view mirror, in the door, on the door sill or on the boot.

What types and brands of Blue and Red Perimeter Lights are available in the DND Telecom webshop?

These lights, which use LED technology, can be installed in cars in a variety of ways. As a rear warning light, direction indicator, reversing warning system, brake light, rear fog light, or even installed behind the windscreen or in the grille. You can also choose between one to three, four, six, eight or twelve additional lights.

Which vehicles can these red and blue light signal accessories be used on?

The flashers and light bridges can be used by police, fire, ambulance, government vehicles and emergency services vehicles. In all cases, vehicles using red and blue lights must be given priority and must continue to proceed unimpeded by pulling over or even stopping. These vehicles should be approached with extreme caution.

Why is it important to use Blue and Red Perimeter Lights on certain vehicles or in certain situations?

The red and blue lights should only be used by vehicles authorised to use differentiating signals. The use of red and blue flashers as differential signals is only permitted in emergency situations.

What technology is used for Blue and Red Perimeter Lights?

Thanks to specially selected latest generation LED diodes and a carefully designed lens replacement system, these versatile luminaires guarantee light levels that comply with legal requirements. LED technology in the red and blue auxiliary flashers also ensures the correct beam angle.

But there are also supplementary blue and red flashing beacons that are equipped with a strobe. The supplementary light signals in the DND Telecom webshop have up to 33 different flashing patterns. But in addition, you can also choose supplementary beacons with optics using Fusion II technology.

Taking into account the customer's needs, there are many ways to install the auxiliary flasher, such as behind the grille, behind the windscreen (also known as windscreen flasher), behind the rear and side windows, on the rear-view mirror, in the door, on the door sill or on the boot.

In the DND Telecom webshop you can choose from a wide range of Blue and Red Perimeter Lights from many brands. We have light signals from SoundOff, Sirena, Code3, Strobos, Härsch and Hella.