SoundOff Signal Blue and Red Perimeter LED Light

The distinctive signs of the SoundOff Signal include additional directional blue flashing lights. This group includes additional signs that can be mounted on the car's radiator grille, windscreen flashers that can be fixed behind the windshield with a fixed or suction cup solution, and blue flashing modules that can be mounted on the vehicle door or mounted on the exterior rearview mirror. The individual lights all differ in terms of mounting, appearance and number of LEDs, so the additional flashing lights can always be selected keeping in mind the characteristics of the vehicle. Some models are capable of single color, while others are capable of 2-color flashing mode. The flashers are available in blue, red and yellow. SoundOff offers a number of mounting methods (screw mounting, adhesive mounting) as well as designs (recessed or protruding from the body plane). The SoundOff Signal perimeter and directional lights represent outstanding quality on the market.
Change product view: Order products by:
Filter products
24 products in total, page 1: 1 - 24 / 241

• 3 LEDs
• Dimensions: 6,4cm width x 3,6cm height x 3,2cm depth
• Includes rubber mounting gasket and mounting hardware with 12″ of 3-wire cable for hard wire installation
• 33 flash patterns
• 10-30Vdc input voltage
• Many versatile mounting options with optional brackets
• The picture and the price refers to the EL3SN30R article number

Gross price (including 27% VAT): 202.83€ (Net price: 159.71€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sits just 0.3 inches (0.8 cm) from the body of the vehicle when installed
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE5BB-EU article number

Gross price (including 27% VAT): 167.42€ (Net price: 131.83€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sleek, narrow surface mount light, fits almost anywhere
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE2RB-EU article number

Gross price (including 27% VAT): 132.65€ (Net price: 104.45€)

• 6 pcs GEN3 LEDs
• Dimensions: 14cm width x 2,7cm height x 4,6cm depth
• Sleek, narrow surface mount light, fits almost anywhere
• 33 flash patterns
• 10-30Vdc input voltage
• Xylex lencs designed for maximum, extreme angle output
• Black housing with rubber mounting gasket
• The housing is availabe in different colours on request
• Light sync: 4 single and 2 dual-stacked
• ECE R65 certification
• The picture and the price refers to the EGHSTE2BB-EU article number

Gross price (including 27% VAT): 167.42€ (Net price: 131.83€)

• 6 pcs high intensity LED
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 12,27cm length x 3,6cm height x 3,6cm depth
• 12 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENDSWS1B article number

Gross price (including 27% VAT): 224.08€ (Net price: 176.44€)

• 6 pcs high intensity LED on both sides
• Single color version, full blue and full red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS1RB article number

Gross price (including 27% VAT): 427.56€ (Net price: 336.66€)

• 6 pcs high intensity LED on both sides
• Split color version, half blue and half red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS1JJ article number

Gross price (including 27% VAT): 427.56€ (Net price: 336.66€)

• 12 pcs high intensity LED on both sides
• Single color version, full blue and full red on both sides
• Suction cup mount version
• 12 volt cig plug with 11.5 foot cord
• Dimensions: 28,8cm length x 3,6cm height x 12,7cm depth
• 14 built-in flash patterns
• 10-16Vdc input voltage
• Designed with Light Synch Technology which allows you to synchronize lights to flash alternating or simultaneously
• ECE R10 certification
• The picture and the price refers to the ENFDWS3RB article number

Gross price (including 27% VAT): 488.41€ (Net price: 384.58€)

• Fusion II Technology - optic for a bright, extra wide output
• Dimensions: 8cm width x 2cm height x 4,2cm depth
• Light can be surface mounted to any flat area on any type of vehicle
• 6 flash patterns
• Non-volatile memory - recalls last flash pattern used
• 10-30Vdc input voltage
• 15cm of wire cable for installation
• Light sync: 6 units can be synchronised
• Weatherproof black metal housing
• The picture and the price refers to the EFL1B0B article number

Gross price (including 27% VAT): 67.61€ (Net price: 53.24€)

• Fusion II Technology - optic for a bright, extra wide output
• Dimensions: 8cm width x 2cm height x 4,2cm depth
• Light can be surface mounted to any flat area on any type of vehicle
• 6 flash patterns
• Non-volatile memory - recalls last flash pattern used
• 10-30Vdc input voltage
• 15cm of wire cable for installation
• Light sync: 6 units can be synchronised
• Weatherproof black metal housing
• The picture and the price refers to the EFL1B0R article number

Gross price (including 27% VAT): 67.61€ (Net price: 53.24€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 7,72cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS1SLE3B article number

Gross price (including 27% VAT): 162.27€ (Net price: 127.77€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS2STE3B article number

Gross price (including 27% VAT): 171.60€ (Net price: 135.12€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• ECE R65 and R10 certification
• The picture and the price refers to the EMPS2STE3R article number

Gross price (including 27% VAT): 171.60€ (Net price: 135.12€)

• 4 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 7,72cm width x 2,3cm height x 1cm depth
• Stud mount
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS1STS1R article number

Gross price (including 27% VAT): 138.12€ (Net price: 108.76€)

• 6 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS2STS2B article number

Gross price (including 27% VAT): 192.53€ (Net price: 151.60€)

• 6 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS2STS2R article number

Gross price (including 27% VAT): 192.53€ (Net price: 151.60€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 11,4cm width x 2,3cm height x 1cm depth
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• EMC R10.05, ECE-R65 Class 2 certification
• The picture and the price refers to the EMPS2SME3B article number

Gross price (including 27% VAT): 176.11€ (Net price: 138.67€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 11,4cm width x 2,3cm height x 1cm depth
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• EMC R10.05, ECE-R65 Class 2 certification
• The picture and the price refers to the EMPS2SME3R article number

Gross price (including 27% VAT): 176.11€ (Net price: 138.67€)

• 8 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 11,4cm width x 2,3cm height x 1cm depth
• ClearDuty molded one-piece housing and optic
• 12 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• EMC R10.05, ECE-R65 Class 2 certification
• The picture and the price refers to the EMPS2QME3B article number

Gross price (including 27% VAT): 167.42€ (Net price: 131.83€)

• 12 pcs mPower Fascia LED, ClearDuty optic
• Dimensions: 10,3cm width x 2,3cm height x 1cm depth
• Installs with threaded studs and nuts, optional mounting brackets
• ClearDuty molded one-piece housing and optic
• 10 flash patterns
• Full silicone seal provides greater resistance to gravel pitting, scratching and prevent water from entering light
• 9-32Vdc input voltage
• 45cm of wire cable for installation
• Light sync: 24 units can be synchronised
• SAE Class 1 & CA Title 13 certification
• The picture and the price refers to the EMPS2STS4J article number

Gross price (including 27% VAT): 225.69€ (Net price: 177.71€)

• Dimensions: 3,5 cm width x 2,99 cm height x 3,5 cm depth
• 19 flash patterns
• Current draw: <1.0 Amp @ 12.8 VDC
• 10-30 Vdc input voltage
• 25cm of wire cable for installation
• Opertaing temperature: -40˚ C to +65° C
• SAE J595 Class 2 & ECE 410.05 certified
• The picture and the price refers to the EML6E20RB article number

Gross price (including 27% VAT): 91.11€ (Net price: 71.74€)

• Dimensions: 3,5 cm width x 2,99 cm height x 3,5 cm depth
• 19 flash patterns
• Current draw: <1.0 Amp @ 12.8 VDC
• 10-30 Vdc input voltage
• 25cm of wire cable for installation
• Opertaing temperature: -40˚ C to +65° C
• ECE R10 certified, R65 certified
• The picture and the price refers to the EML6E20B article number

Gross price (including 27% VAT): 91.11€ (Net price: 71.74€)

• Dimensions: 3,5 cm width x 2,99 cm height x 3,5 cm depth
• 19 flash patterns
• Current draw: <1.0 Amp @ 12.8 VDC
• 10-30 Vdc input voltage
• 25cm of wire cable for installation
• Opertaing temperature: -40˚ C to +65° C
• ECE R10 certified, R65 certified
• The picture and the price refers to the EML6E20R article number

Gross price (including 27% VAT): 91.11€ (Net price: 71.74€)

• Light source: 9 red and 9 blue LEDs
• Black dome
• 3.5 m cable with cigarette lighter socket
• 10-16Vdc input voltage
• Suction cups for attachment to the windscreen
• Lights can be synchronized with other auxiliary flashers
• 14 different flashing patterns
• The picture shows the version with model number ENFDWS2RB, the price refers to this version

Gross price (including 27% VAT): 414.68€ (Net price: 326.52€)
24 products in total, page 1: 1 - 24 / 241